SCI时时刷

search
Novel synthesis of amorphous CP@HfO2 nanomaterials for high-performance electrochemical sensing of 2-naphthol
Novel synthesis of amorphous CP@HfO2 nanomaterials for high-performance electrochemical sensing of 2-naphthol
Present research, for the first time, reports a cetylpyridinium (CP)-capped hafnia (HfO2)-based novel nanomaterials (NMs) ...
Disulfide bond-driven hyaluronic acid/sericin nanoparticles for wound-healing application
Disulfide bond-driven hyaluronic acid/sericin nanoparticles for wound-healing application
There is a growing demand of bioinspired wound-healing platforms with superior tissue repairing and low immunogenicity. Hy...
Novel eco-friendly acacia gum-grafted-polyamidoxime@copper ferrite nanocatalyst for synthesis of pyrazolopyridine derivatives
Novel eco-friendly acacia gum-grafted-polyamidoxime@copper ferrite nanocatalyst for synthesis of pyrazolopyridine derivatives
A novel environmentally friendly polymer-based catalytic system was fabricated for the synthesis of biologically active py...
Utilization of different by-products to produce nutritionally rich gelled products
Utilization of different by-products to produce nutritionally rich gelled products
Yellow corn cooking water with yerba mate (Ilex paraguariensis) extract, obtained as a by-product of snack manufacture, wa...
Russian Journal of Nondestructive Testing
Sorry, the page you requested is unavailable. The link you requested might be broken, or no...
Accelerating Algorithm for Total Focusing Method Imaging Based on Optimization of Full Matrix Data
Accelerating Algorithm for Total Focusing Method Imaging Based on Optimization of Full Matrix Data
Total focusing method (TFM) for ultrasonic phased array imaging has the advantages of high imaging resolution, full-scale ...
A Numerical Model for Ultrasonic Time-of-Flight Diffraction (TOFD) Testing of Austenitic Welds
A Numerical Model for Ultrasonic Time-of-Flight Diffraction (TOFD) Testing of Austenitic Welds
Austenitic stainless steel welded components are widely used in industrial applications. Due to the large grain s...
Ultrasonic Inspection Technique for Welded Joints Obtained by Spot Friction Stir Welding
Ultrasonic Inspection Technique for Welded Joints Obtained by Spot Friction Stir Welding
Friction stir welding has found wide application in aircraft and rocket engineering, primarily due to the possibility of o...
Quantitative Detection of Internal Flaws of Action Rod Based on Ultrasonic Technology
Quantitative Detection of Internal Flaws of Action Rod Based on Ultrasonic Technology
Manual visual inspection of the action rod of a rail switch machine is wasteful and incapable of detecting interior faults...
Detection of Cracks in Solar Panel Images Using Improved AlexNet Classification Method
Detection of Cracks in Solar Panel Images Using Improved AlexNet Classification Method
Renewable energy resources are the only solution to the energy crisis over the world. Production of energy by the solar pa...
Reconstruction of Reflector Images at the Boundary of the Base and Deposited Metal Using Plane Wave Imaging Technique
Reconstruction of Reflector Images at the Boundary of the Base and Deposited Metal Using Plane Wave Imaging Technique
It is proposed to use plane wave imaging (PWI) technique for ultrasonic inspection of welded joints with narrow g...
Solving the Inverse Problem of Surface Reconstruction during Electron Beam Surfacing
Solving the Inverse Problem of Surface Reconstruction during Electron Beam Surfacing
The inverse problem of reconstructing the surface by the signal of continuous X-ray radiation is posed in relation to the ...
On the Solution to One Problem of Magnetostatics for a Pipe with Inner Surface Defect
On the Solution to One Problem of Magnetostatics for a Pipe with Inner Surface Defect
An algorithm has been developed and implemented for the numerical solution of a direct linear magnetostatics problem by ca...
Compressive Thermal Wave Imaging for Subsurface Analysis
Compressive Thermal Wave Imaging for Subsurface Analysis
Subsurface detail extraction in active thermography demands high capturing rates, resulting in less exposure time, data re...
Surface-functionalized design of blood-contacting biomaterials for preventing coagulation and promoting hemostasis
Surface-functionalized design of blood-contacting biomaterials for preventing coagulation and promoting hemostasis
The anticoagulation and hemostatic properties of blood-contacting materials are opposite lines of research, but their real...
A robust membrane with dual superlyophobicity for solving water-caused lubricant deterioration and water contamination
A robust membrane with dual superlyophobicity for solving water-caused lubricant deterioration and water contamination
Lubricants are often contaminated by water in different ways. Water-polluted lubricants extremely accelerate wear corrosio...
Tribological properties of oil-impregnated polyimide in double-contact friction under micro-oil lubrication conditions
Tribological properties of oil-impregnated polyimide in double-contact friction under micro-oil lubrication conditions
Oil-impregnated porous polyimide (iPPI) materials are usually used as retainer for bearings. In these bearings, balls and ...
Effects of pore size on the lubrication properties of porous polyimide retainer material
Effects of pore size on the lubrication properties of porous polyimide retainer material
An oil-impregnated porous polyimide (PI) retainer is used in space rolling bearings to improve the lubrication performance...
Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions
Characterization of the tribologically relevant cover layers formed on copper in oxygen and oxygen-free conditions
Engineering in vacuum or under a protective atmosphere permits the production of materials, wherever the absence of oxygen...
Method for the measurement of triboelectric charge transfer at solid–liquid interface
Method for the measurement of triboelectric charge transfer at solid–liquid interface
Triboelectrification between a liquid and a solid is a common phenomenon in our daily life and industry. Triboelectric cha...
Tribological behaviour of Ti3C2Tx nano-sheets: Substrate-dependent tribo-chemical reactions
Tribological behaviour of Ti3C2Tx nano-sheets: Substrate-dependent tribo-chemical reactions
MXenes, a newly emerging class of layered two dimensional (2D) materials, are promising solid lubricants due to their 2D s...
Interaction between in situ stress states and tectonic faults: A comment
Interaction between in situ stress states and tectonic faults: A comment
Understanding the in situ stress state is crucial in many engineering problems and earth science research. The present art...
Structural, magnetic and antibacterial properties of manganese-substituted magnetite ferrofluids
Structural, magnetic and antibacterial properties of manganese-substituted magnetite ferrofluids
Manganese-substituted magnetite ferrofluids (FFs) MnxFe1−xFe2O4 (x = 0–0.8) were prepared in this work through...