SCI时时刷

search
The influence of filler load in 3D printing resin-based composites
The influence of filler load in 3D printing resin-based composites
Three-dimensional (3D) printing is an arising technology with a high turnover of development and innovation. It was estima...
Level of BPA contamination in resin composites determines BPA release
Level of BPA contamination in resin composites determines BPA release
Resin composites are currently considered the material of choice for tooth restorations [1], although there are some conce...
Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics
Conventional sintering of nano-crystalline Yttria-Stabilized Zirconia enables high-strength, highly translucent and opalescent dental ceramics
Development of restorative materials with advanced aesthetic properties is a new frontier in dentistry owing to the patien...
Influence of different pre-treatments on the resin infiltration depth into enamel of teeth affected by molar-incisor hypomineralization (MIH)
Influence of different pre-treatments on the resin infiltration depth into enamel of teeth affected by molar-incisor hypomineralization (MIH)
ObjectivesThis in vitro pilot study aimed to evaluate whether different pre-treatments (demineralization, deproteinization...
Do strength of zirconia-abutment-interfaces depend on cement, zirconia type and titanium abutment dimensions?
Do strength of zirconia-abutment-interfaces depend on cement, zirconia type and titanium abutment dimensions?
KeywordsZirconia-abutment-interfaceZirconia typeChimney heightGingival heightComposite cementTensile testData Availability...
Effect of polymerisation protocols on water sorption, solubility and hygroscopic expansion of fast-cure bulk-fill composite
Effect of polymerisation protocols on water sorption, solubility and hygroscopic expansion of fast-cure bulk-fill composite
Available online 10 May 2024Author links open overlay panel, , AbstractObjectiveThis study examines the effect of two ligh...
Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials
Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials
BackgroundThree-dimensional (3D) printing is increasingly used to fabricate dental restorations due to its enhanced precis...
Photopolymerizable semi-crystalline polymers for thermally reversible, 3D printable cast molds
Photopolymerizable semi-crystalline polymers for thermally reversible, 3D printable cast molds
The advancement of 3D printing technology and additive manufacturing (AM) has led to significant innovation in the dental ...
Multi-acrylamides improve bond stability through collagen reinforcement under physiological conditions
Multi-acrylamides improve bond stability through collagen reinforcement under physiological conditions
Resin-based materials have been extensively used for direct chair-side restorative procedures, and though this has improve...
Dielectric probing of low-temperature degradation resistance of commercial zirconia bio-ceramics
Dielectric probing of low-temperature degradation resistance of commercial zirconia bio-ceramics
Available online 7 May 2024Author links open overlay panel, , , , , Highlight•LTD observed in the 3Y-TZP ceramics, accompa...
Synthesis of polymerizable betulin maleic diester derivative for dental restorative resins with antibacterial activity
Synthesis of polymerizable betulin maleic diester derivative for dental restorative resins with antibacterial activity
Nowadays, dental caries remains one of the most prevalent non-communicable diseases and poses serious global public health...
Cytotoxicity effects and differentiation potential of ormocer-based and nanohybrid composite resins on human dental pulp stem cells\
Cytotoxicity effects and differentiation potential of ormocer-based and nanohybrid composite resins on human dental pulp stem cells\
Available online 9 May 2024Author links open overlay panel, , , , , , , Highlights•Ormocer-based resin demonstrated to be ...
Microstructural investigation of hybrid CAD/CAM restorative dental materials by micro-CT and SEM
Microstructural investigation of hybrid CAD/CAM restorative dental materials by micro-CT and SEM
ObjectivesAn increasing number of CAD/CAM (computer-aided design/computer-aided manufacturing) hybrid materials have been ...
Bond strength and marginal adaptation of resin composites and correlations with clinical results
Bond strength and marginal adaptation of resin composites and correlations with clinical results
ObjectivesDue to innumerable confounding factors and a high number of types and brands of dental restorative materials, th...
TiO2 nanotubes as an antibacterial nanotextured surface for dental implants: Systematic review and meta-analysis
TiO2 nanotubes as an antibacterial nanotextured surface for dental implants: Systematic review and meta-analysis
ObjectivesNanotechnology is constantly advancing in dental science, progressing several features aimed at improving dental...
Effect of curing mode of resin composite cements on water sorption, color stability, and biaxial flexural strength
Effect of curing mode of resin composite cements on water sorption, color stability, and biaxial flexural strength
Available online 3 May 2024Author links open overlay panel, , Highlights•Water sorption and solubility of three resin comp...
Post-failure analysis of model resin-composite restorations subjected to different chemomechanical challenges
Post-failure analysis of model resin-composite restorations subjected to different chemomechanical challenges
Dental resin composites are widely used for restoring damaged or carious teeth because of their versatility, tooth-like ap...
Evaluating the effect of functionally graded materials on bone remodeling around dental implants
Evaluating the effect of functionally graded materials on bone remodeling around dental implants
A missing tooth can lead to problems such as eating, speaking, and sometimes serious issues with self-confidence [1]. Dent...
Biomechanical reinforcement by CAD-CAM materials affects stress distributions of posterior composite bridges: 3D finite element analysis.
Biomechanical reinforcement by CAD-CAM materials affects stress distributions of posterior composite bridges: 3D finite element analysis.
ObjectivesThis 3D finite element analysis study aimed to investigate the effect of reinforcing CAD-CAM bars on stress dist...
Glass science behind lithium silicate glass-ceramics
Glass science behind lithium silicate glass-ceramics
Available online 5 April 2024Author links open overlay panel, , , , , , , , AbstractObjectivesLithium silicate-based glass...
Upholding scientific integrity in dental materials adoption
Upholding scientific integrity in dental materials adoption
Cookies are used by this site. Cookie SettingsAll content on this site: Copyright © 2024 Elsevier B.V., its licensors, an...
Recent advances in dental zirconia: 15 years of material and processing evolution
Recent advances in dental zirconia: 15 years of material and processing evolution
Fifteen years have passed since professors Isabelle Denry and Robert Kelly published two seminal literature reviews on zir...
Effect of strontium fluoride on mechanical and remineralization properties of enamel: An in-vitro study on a modified orthodontic adhesive
Effect of strontium fluoride on mechanical and remineralization properties of enamel: An in-vitro study on a modified orthodontic adhesive
ObjectivesEvaluate the ability of strontium fluoride on bond strength and enamel integrity after incorporation within orth...
Compatibility versus reaction diffusion: Factors that determine the heterogeneity of polymerized adhesive networks
Compatibility versus reaction diffusion: Factors that determine the heterogeneity of polymerized adhesive networks
The introduction of photopolymerizable, resin-based composite (RBC) fillings has in many ways advanced the field of restor...
Properties of model E-glass fiber composites with varying matrix monomer ratios
Properties of model E-glass fiber composites with varying matrix monomer ratios
MethodsA control (Group A), monomer mixture comprising 60% Bis-GMA, 30% TEGDMA, and 10% PMMA (typical FRC monomers) was us...
Effects of solvent type and UV post-cure time on 3D-printed restorative polymers
Effects of solvent type and UV post-cure time on 3D-printed restorative polymers
The digital workflow has gained popularity in dentistry, and numerous acrylic-based photosensitive resins are now availabl...
Temperature rise in photopolymerized adhesively-bonded resin composite: A thermography study
Temperature rise in photopolymerized adhesively-bonded resin composite: A thermography study
ObjectivesTo assess visually and quantitatively the contributions of the adhesive layer photopolymerization and the subseq...