S. Bhattarai et al., A detailed review of perovskite solar cells: introduction, working principle, modelling, fabrication techniques, future challenges. Micro Nanostruct. 172, 207450 (2022)
S. Bhattarai, R. Pandey, J. Madan, F. Ahmed, S. Shabnam, Performance improvement approach of all inorganic perovskite solar cell with numerical simulation. Mater. Today Commun. 33, 104364 (2022)
A. Bouich, J. Mari-Guaita, B.M. Soucase, P. Palacios, Manufacture of high-efficiency and stable lead-free solar cells through antisolvent quenching engineering. Nanomaterials 12(17), 2901 (2022)
S. Bhattarai, A. Sharma, T.D. Das, Efficiency enhancement of perovskite solar cell by using doubly carrier transport layers with a distinct bandgap of MAPbI3 active layer. Optik 224, 165430 (2020)
L.-C. Chen, C.-Y. Weng, Optoelectronic properties of MAPbI3 perovskite/titanium dioxide heterostructures on porous silicon substrates for cyan sensor applications. Nanoscale Res. Lett. 10(1), 404 (2015)
L.M. Herz, Charge-carrier mobilities in metal halide perovskites: fundamental mechanisms and limits. ACS Energy Lett. 2(7), 1539–1548 (2017)
K.D. Jayan, V. Sebastian, Comparative performance analysis of mixed halide perovskite solar cells with different transport layers and back metal contacts. Semicond. Sci. Technol. 36(6), 065010 (2021)
S. Karthick, S. Velumani, J. Bouclé, Experimental and SCAPS simulated formamidinium perovskite solar cells: a comparison of device performance. Sol. Energy 205, 349–357 (2020)
R. Pandey, J. Madan, R. Sharma, in Enhanced charge extraction in metal-perovskite-metal back-contact solar cell structure through electrostatic doping: a numerical study. IEEE Transactions on Electron Devices, (2021), pp. 1–7
R. Pandey, R. Chaujar, Numerical simulations: toward the design of 27.6% efficient four-terminal semi-transparent perovskite/SiC passivated rear contact silicon tandem solar cell. Superlattices Microstruct. 100, 656–666 (2016)
A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131(17), 6050–6051 (2009)
M.K. Hossain et al., Numerical analysis in DFT and SCAPS-1D on the influence of different charge transport layers of CsPbBr3 perovskite solar cells. Energy Fuels 37, 6078–6098 (2023)
M.K. Hossain et al., A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu2FeSnS4 as charge transport layers. New J. Chem. (2023). https://doi.org/10.1039/D3NJ00320E
S. Bhattarai, T.D. Das, Optimization of carrier transport materials for the performance enhancement of the MAGeI3 based perovskite solar cell. Sol. Energy 217, 200–207 (2021)
Y. Raoui, H. Ez-Zahraouy, N. Tahiri, O. El Bounagui, S. Ahmad, S. Kazim, Performance analysis of MAPbI3 based perovskite solar cells employing diverse charge selective contacts: simulation study. Sol. Energy 193, 948–955 (2019)
S. Bhattarai et al., Comparative study of distinct halide composites for highly efficient cesium-based perovskite solar cells. Energy Fuels 37(20), 16035–16049 (2023)
M.K. Hossain et al., Design insights into La2NiMnO6-based perovskite solar cells employing different charge transport layers: DFT and SCAPS-1D frameworks. Energy Fuels 37(17), 13377–13396 (2023)
J.-H. Im, C.-R. Lee, J.-W. Lee, S.-W. Park, N.-G. Park, 6.5% efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 3(10), 4088–4093 (2011). https://doi.org/10.1039/C1NR10867K
G. Gupta, S. Verma, R. Nagarajan, S. Rath, Microstructural and bandgap investigations of wurtzite-phase ZnMgO nanopowders synthesized by ball-milling. Physica B 604, 412735 (2021)
M. Liu, M.B. Johnston, H.J. Snaith, Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature 501(7467), 395–398 (2013)
J. Madan, M. Shivani, R. Pandey, R. Sharma, Device simulation of 17.3% efficient lead-free all-perovskite tandem solar cell. Sol. Energy 197, 212–221 (2020)
B.K. Ravidas, M.K. Roy, D.P. Samajdar, Investigation of photovoltaic performance of lead-free CsSnI3-based perovskite solar cell with different hole transport layers: first principle calculations and SCAPS-1D analysis. Sol. Energy 249, 163–173 (2023)
M. Burgelman, J. Verschraegen, S. Degrave, P. Nollet, Modeling thin-film PV devices. Prog. Photovolt. Res. Appl. 12, 143–153 (2004)
M. Burgelman, J. Marlein, Analysis of graded band gap solar cells with SCAPS, in: Proceedings of the 23rd European Photovoltaic Conference (2008)
S. Bhattarai et al., Investigation of carrier transport materials for performance assessment of lead-free perovskite solar cells. IEEE Trans. Electron Devices 69(6), 3217–3224 (2022)
M.S. Rahman, S. Miah, M.S.W. Marma, M. Ibrahim, Numerical simulation of CsSnI3-based perovskite solar cells: influence of doped-ITO front contact, in: 2020 IEEE Region 10 Conference (TENCON), 2020, pp. 140–145.
E. Widianto, Shobih, E.S. Rosa, K. Triyana, N.M. Nursam, I. Santoso, Performance analysis of carbon-based perovskite solar cells by graphene oxide as hole transport layer: Experimental and numerical simulation. Opt. Mater. 121, 111584 (2021)
A. Thakur, D. Singh, S. Kaur Gill, Numerical simulations of 26.11% efficient planar CH3NH3PbI3 perovskite n-i-p solar cell. Mater. Today Proc. 71, 195–201 (2022)
T. Dureja, A. Garg, S. Bhalla, D. Bhutani, A. Khanna, Double lead-free perovskite solar cell for 19.9% conversion efficiency: a SCAPS-1D based simulation study. Mater. Today Proc. 71, 239–242 (2022)
S. Bhattarai, A. Sharma, T.D. Das, Factor affecting the performance of perovskite solar cell for distinct MAPI layer thickness. AIP Conf. Proc. 2269(1), 030071 (2020)
S. Bhattarai, A. Sharma, D. Muchahary, D. Gogoi, T.D. Das, Numerical simulation study for efficiency enhancement of doubly graded perovskite solar cell. Opt. Mater. 118, 111285 (2021)
S. Rai, B.K. Pandey, D.K. Dwivedi, Modeling of highly efficient and low cost CH3NH3Pb(I1-xClx)3 based perovskite solar cell by numerical simulation. Opt. Mater. 100, 109631 (2020)
H.-J. Du, W.-C. Wang, J.-Z. Zhu, Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency. Chin. Phys. B 25(10), 108802 (2016)
C.J. Diliegros-Godines, O. García-Zaldívar, F.J. Flores-Ruiz, E. Fernández-Domínguez, G. Torres-Delgado, R. Castanedo-Pérez, Impedance spectroscopy of Au/Cu2Te/CdTe/CdS/Cd2SnO4/glass solar cells. Ceram. Int. 49(4), 6699–6707 (2023)
S. Bhattarai et al., Numerical investigation of toxic free perovskite solar cells for achieving high efficiency. Mater. Today Commun. 35, 105893 (2023)
留言 (0)