Hussin JM, Rahman IA, Memon AH (2013) The way forward in sustainable construction: issues and challenges. Int J Adv Appl Sci 2:15–24

Google Scholar 

Oktay H, Yumrutas R, Akpolat A (2015) Mechanical and thermophysical properties of lightweight aggregate concretes. Constr Build Mater 96:217–225

Article  Google Scholar 

Dhir RK, de Brito J, Silva RV, Lye CQ (2019) Processing of recycled aggregates. Sustainable Constr Mater. https://doi.org/10.1016/b978-0-08-100985-7.00004-2

Article  Google Scholar 

Drew LJ, Langer WH, Sachs JS (2002) Environmentalism and natural aggregate mining. Nat Resour Res 11:19–28. https://doi.org/10.1023/A:1014283519471

Article  Google Scholar 

Dan Gavriletea M (2017) Environmental impacts of sand exploitation. Analysis of sand market. Sustainability (Switzerland) 9. https://doi.org/10.3390/su9071118

Suresh S, Revathi J (2016) Effect of M-Sand on Setting Time of High Performance Concrete. Asian Journal of Research in Social Sciences and Humanities 6:1648. https://doi.org/10.5958/2249-7315.2016.01118.7

Article  Google Scholar 

Jayswal S, Mungule M (2018) Assessment of M-Sand As Potential Substitute for Natural Sand in Concrete. International Conference on 2019:7–8

Google Scholar 

Sudha C, Kottuppillil AK, Ravichandran PT, Divya Krishnan K (2016) Study on Mechanical Properties of Concrete with Manufactured Sand and Bagasse Ash. Indian Journal of Science and Technology 9: 1–6. https://doi.org/10.17485/ijst/2016/v9i34/95867

Pilegis M, Gardner D, Lark R (2016) An investigation into the use of manufactured sand as a 100% replacement for fine aggregate in concrete. Materials 9:440. https://doi.org/10.3390/ma9060440

Article  Google Scholar 

Li B, Ke G, Zhou M (2011) Influence of manufactured sand characteristics on strength and abrasion resistance of pavement cement concrete. Constr Build Mater 25:3849–3853. https://doi.org/10.1016/j.conbuildmat.2011.04.004

Article  Google Scholar 

Elavenil S, Engg C (2013) Manufactured Sand. A Solution And An Alternative To River Sand And In Concrete Manufacturing 2:20–24

Google Scholar 

Alyami M, Hakeem IY, Amin M, Zeyad AM, Tayeh BA, Agwa IS (2023) Effect of agricultural olive, rice husk and sugarcane leaf waste ashes on sustainable ultra-high-performance concrete. Journal of Building Engineering 72:106689

Article  Google Scholar 

Alyami M, Mydin MAO, Zeyad AM, Majeed SS, Tayeh BA (2023) Influence of wastepaper sludge ash as partial cement replacement on the properties of lightweight foamed concrete. Journal of Building Engineering 79:107893

Article  Google Scholar 

Golewski GL (2023) Mechanical properties and brittleness of concrete made by combined fly ash, silica fume and nanosilica with ordinary Portland cement. AIMS Mater Sci 10:390–404

Article  Google Scholar 

Zeyad AM, Shubaili M, Abutaleb A (2023) Using volcanic pumice dust to produce high-strength self-curing concrete in hot weather regions. Case Studies in Construction Materials 18:e01927

Article  Google Scholar 

Zeyad AM (2023) Sustainable Concrete Production: Incorporating recycled wastewater as a green building material. Constr Build Mater 407:133522

Article  Google Scholar 

Golewski GL (2023) Assessing of water absorption on concrete composites containing fly ash up to 30% in regards to structures completely immersed in water. Case Studies in Construction Materials 19:e02337

Article  Google Scholar 

Wang L, Zhang P, Golewski G, Guan J (2023) Fabrication and properties of concrete containing industrial waste. Frontiers in Materials 10:1169715

Article  Google Scholar 

Elbasri OMM, Nser S, Shubaili M, Abdullah GMS, Zeyad AM (2022) Performance of self-compacting concrete incorporating wastepaper sludge ash and pulverized fuel ash as partial substitutes. Case Studies in Construction Materials 17:e01459

Article  Google Scholar 

Golewski GL (2023) Concrete Composites Based on Quaternary Blended Cements with a Reduced Width of Initial Microcracks. Appl Sci 13:7338

Article  Google Scholar 

Golewski GL (2023) The effect of the addition of coal fly ash (CFA) on the control of water movement within the structure of the concrete. Materials 16:5218

Article  Google Scholar 

Juric B, Hanzic L, Ilic R, Samec N (2006) Utilization of municipal solid waste bottom ash and recycled aggregate in concrete. Waste Manage 26:1436–1442

Article  Google Scholar 

Patil AR, Sathe SB (2021) Feasibility of sustainable construction materials for concrete paving blocks: A review on waste foundry sand and other materials. Materials Today: Proceedings 43:1552–1561

Google Scholar 

Yoshizawa S, Tanaka M, Shekdar AV (2004) Global Trends in Waste Generation. In: Recycling, Waste Treatment and Clean Technology, TMS Mineral, Metals and Materials Publishers:1541–1552.

Yin K, Ahamed A, Lisak G (2018) Environmental perspectives of recycling various combustion ashes in cement production–A review. Waste Manage 78:401–416

Article  Google Scholar 

Rashad AM (2018) An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste, mortar and concrete. Constr Build Mater 187:89–117

Article  Google Scholar 

ASTM C150/C150M-22 (2022) Standard specification for portland cement. West Conshohocken, PA: ASTM International, approved July 1, 2022, Published July 2022, https://doi.org/10.1520/C0150_C0150M-22.

BIS (2012) Indian Standard Drinking Water Specification (Second Revision). Bureau of Indian Standards IS 10500:1–11

Google Scholar 

Bureau of Indian Standards (2003) IS 2645: 2003 Integral Waterproofing Compounds for Cement Mortar and Concrete -Specification. 16

Bureau of Indian Standards (1993) IS 9103: 1999 Indian standard concrete admixtures-specifications

EN BS (2005) 1052–3. BS EN 196–1: Methods of testing cement. Determination of strength. https://doi.org/10.3403/30291447U

Snehal K, Das BB, Akanksha M (2020) Early age, hydration, mechanical and microstructure properties of nano-silica blended cementitious composites. Constr Build Mater 233:117212

Article  Google Scholar 

Zhang J, Scherer GW (2011) Comparison of methods for arresting hydration of cement. Cem Concr Res 41:1024–1036

Article  Google Scholar 

EN BS (1999) 1015–3. Methods of Test for Mortar for Masonry—Part 3: Determination of Consistence of Fresh Mortar (by Flow Table). NBN, Bureau for Standardisation: Brussels, Belgium

ASTM C403 (2005) ASTM C 403, “Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance,” ASTM C 403–95, Annual Book of ASTM Standards, American Society for Testing and Materials, Pennsylvania, 1998. ASTM. 1–7. https://doi.org/10.1520/C0403

BIS (2005) Indian Standard IS: 4031 (Part 6)-1988 (Reaffirmed 2005). Methods Of Physical Tests For Hydraulic Cement-Part 6: Determination of compressive strength of hydraulic cement other than masonry cement (First Revision).

EN BS (1999) 1015–10, 1999. Methods of test for mortar for masonry—Part 10: Determination of dry bulk density of hardened mortar. Br Stand[29] BS EN 1011–1015

Safiuddin M, Hearn N (2005) Comparison of ASTM saturation techniques for measuring the permeable porosity of concrete. Cem Concr Res 35:1008–1013

Article  Google Scholar 

Das BB, Singh DN, Pandey SP (2010) A comparative study for determining pore volume of concrete. Indian Concrete Journal 84:7

Google Scholar 

Bureau of Indian Standards (2018) IS 516: Part 5/Sec 1–2018 Hardened Concrete — Methods of Test, Non-destructive Testing of Concrete, Section 1, Ultrasonic Pulse Velocity Testing, First Revision.

BS 1881–122 BS (2011) Testing concrete-Method for determination of water absorption.

Singh LP, Goel A, Bhattacharyya SK, Sharma U, Mishra G (2015) Hydration studies of cementitious material using silica nanoparticles. J Adv Concr Technol 13:345–354

Article  Google Scholar 

Jain J, Neithalath N (2009) Analysis of calcium leaching behavior of plain and modified cement pastes in pure water. Cement Concr Compos 31:176–185

Article  Google Scholar 

Singh LP, Bhattacharyya SK, Mishra G, Ahalawat S (2012) Reduction of calcium leaching in cement hydration process using nanomaterials. Mater Technol 27:233–238

Article  Google Scholar 

Singh LP, Bhattacharyya SK, Ahalawat S (2012) Preparation of size controlled silica nano particles and its functional role in cementitious system. J Adv Concr Technol 10:345–352

Article  Google Scholar 

Jayalath A, San Nicolas R, Sofi M, Shanks R, Ngo T, Aye L, Mendis P (2016) Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials. Constr Build Mater 120:408–417

Article  Google Scholar 

Dinger DR, Funk JE (1997) Particle-packing phenomena and their application in materials processing. MRS Bull 22:19–23

Article  Google Scholar 

User Guide Elkem Materials Mixture Analyser-EMMA, Version-1.

IS 13311: Part 1–1992 Method of Non-destructive testing of concrete, Part-1: Ultrasonic pulse velocity. Bureau of Indian Standards: 1–7

Snehal K, Das BB (2022) Pozzolanic reactivity and drying shrinkage characteristics of optimized blended cementitious composites comprising of Nano-Silica particles. Constr Build Mater 316:125796

Article  Google Scholar 

Snehal K, Das BB (2021) Acid, alkali and chloride resistance of binary, ternary and quaternary blended cementitious mortar integrated with nano-silica particles. Cement Concr Compos 123:104214

Article  Google Scholar 

Patil AY, Banapurmath NR, EP S, Chitawadagi M V, Khan TMY, Badruddin IA, Kamangar S, (2020) Multi-scale study on mechanical property and strength of new green sand (Poly Lactic Acid) as replacement of fine aggregate in concrete mix. Symmetry 12:1823

Article  Google Scholar 

Hu Q, Aboustait M, Kim T, Ley MT, Hanan JC, Bullard J, Winarski R, Rose V (2016) Direct three-dimensional observation of the microstructure and chemistry of C3S hydration. Cem Concr Res 88:157–169

Article  Google Scholar 

Goudar SK, Sumukh EP, Das BB (2023) Implication of high-volume mineral admixture on mechanical properties and microstructure at steel-concrete interface. The Indian Concrete Journal 97:17–27

Google Scholar