Biedermann R, Tonin A, Krismer M, Rachbauer F, Eibl G, Stockl B (2005) Reducing the risk of dislocation after total hip arthroplasty: the effect of orientation of the acetabular component. J Bone Joint Surg Br 87(6):762

Article  CAS  PubMed  Google Scholar 

Dudda M, Gueleryuez A, Gautier E, Busato A, Roeder C (2010) Risk factors for early dislocation after total hip arthroplasty: a matched case–control study. J Orthop Surg (Hong Kong) 18(2):179

Article  PubMed  Google Scholar 

Kennedy JG, Rogers WB, Soffe KE, Sullivan RJ, Griffen DG, Sheehan LJ (1998) Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty 13(5):530

Article  CAS  PubMed  Google Scholar 

Yamaguchi M, Akisue T, Bauer TW, Hashimoto Y (2000) The spatial location of impingement in total hip arthroplasty. J Arthroplasty 15(3):305

Article  CAS  PubMed  Google Scholar 

Korduba LA, Essner A, Pivec R, Lancin P, Mont MA, Wang A, Delanois RE (2014) Effect of acetabular cup abduction angle on wear of ultrahigh-molecular-weight polyethylene in hip simulator testing. Am J Orthop (Belle Mead NJ) 43(10):466

PubMed  Google Scholar 

Patil S, Bergula A, Chen PC, Colwell CW Jr, D’Lima DD (2003) Polyethylene wear and acetabular component orientation. J Bone Joint Surg Am 85-A(Suppl 4):56

Article  Google Scholar 

Tian JL, Sun L, Hu RY, Han W, Tian XB (2017) Correlation of cup inclination angle with liner wear for metal-on-polyethylene in hip primary arthroplasty. Orthop Surg 9(2):186

Article  PubMed  PubMed Central  Google Scholar 

Korhonen RK, Koistinen A, Konttinen YT, Santavirta SS, Lappalainen R (2005) The effect of geometry and abduction angle on the stresses in cemented UHMWPE acetabular cups–finite element simulations and experimental tests. Biomed Eng Online 4:32

Article  PubMed  PubMed Central  Google Scholar 

Hart AJ, Ilo K, Underwood R, Cann P, Henckel J, Lewis A, Cobb J, Skinner J (2011) The relationship between the angle of version and rate of wear of retrieved metal-on-metal resurfacings: a prospective, CT-based study. J Bone Joint Surg Br 93(3):315

Article  CAS  PubMed  Google Scholar 

Hart AJ, Muirhead-Allwood S, Porter M, Matthies A, Ilo K, Maggiore P, Underwood R, Cann P, Cobb J, Skinner JA (2013) Which factors determine the wear rate of large-diameter metal-on-metal hip replacements? Multivariate analysis of two hundred and seventy-six components. J Bone Joint Surg Am 95(8):678

Article  CAS  PubMed  Google Scholar 

Angadji A, Royle M, Collins SN, Shelton JC (2009) Influence of cup orientation on the wear performance of metal-on-metal hip replacements. Proc Inst Mech Eng Part H 223(4):449

Article  CAS  Google Scholar 

De Haan R, Pattyn C, Gill HS, Murray DW, Campbell PA, De Smet K (2008) Correlation between inclination of the acetabular component and metal ion levels in metal-on-metal hip resurfacing replacement. J Bone Joint Surg Br 90(10):1291

Article  PubMed  Google Scholar 

Langton DJ, Jameson SS, Joyce TJ, Webb J, Nargol AV (2008) The effect of component size and orientation on the concentrations of metal ions after resurfacing arthroplasty of the hip. J Bone Joint Surg Br 90(9):1143

Article  CAS  PubMed  Google Scholar 

Kosak R, Kralj-Iglic V, Iglic A, Daniel M (2011) Polyethylene wear is related to patient-specific contact stress in THA. Clin Orthop Relat Res 469(12):3415

Article  PubMed  PubMed Central  Google Scholar 

Little NJ, Busch CA, Gallagher JA, Rorabeck CH, Bourne RB (2009) Acetabular polyethylene wear and acetabular inclination and femoral offset. Clin Orthop Relat Res 467(11):2895

Article  PubMed  PubMed Central  Google Scholar 

Affatato S, Traina F, Mazzega-Fabbro C, Sergo V, Viceconti M (2009) Is ceramic-on-ceramic squeaking phenomenon reproducible in vitro? A long-term simulator study under severe conditions. J Biomed Mater Res B Appl Biomater 91(1):264

Article  CAS  PubMed  Google Scholar 

Dalla Pria PZL, Esopi P, Masoni D (2010) Breakage and noises in ceramic on ceramic couplings. Eur Orthop Traumatol 1(2):53

Article  Google Scholar 

Bonnin MP, Archbold PH, Basiglini L, Selmi TA, Beverland DE (2011) Should the acetabular cup be medialised in total hip arthroplasty. Hip Int 21(4):428

Article  PubMed  Google Scholar 

Kiyama T, Naito M, Shitama H, Maeyama A (2009) Effect of superior placement of the hip center on abductor muscle strength in total hip arthroplasty. J Arthroplasty 24(2):240

Article  PubMed  Google Scholar 

Parvizi J, Sharkey PF, Bissett GA, Rothman RH, Hozack WJ (2003) Surgical treatment of limb-length discrepancy following total hip arthroplasty. J Bone Joint Surg Am 85(12):2310

Article  PubMed  Google Scholar 

Bader RJ, Steinhauser E, Willmann G, Gradinger R (2001) The effects of implant position, design and wear on the range of motion after total hip arthroplasty. Hip Int 11(2):80

Article  Google Scholar 

Widmer KH (2007) Containment versus impingement: finding a compromise for cup placement in total hip arthroplasty. Int Orthop 31(Suppl 1):S29

Article  PubMed  Google Scholar 

Barrack RL, Krempec JA, Clohisy JC, McDonald DJ, Ricci WM, Ruh EL, Nunley RM (2013) Accuracy of acetabular component position in hip arthroplasty. J Bone Joint Surg Am 95(19):1760

Article  PubMed  Google Scholar 

Elson LC, Barr CJ, Chandran SE, Hansen VJ, Malchau H, Kwon YM (2013) Are morbidly obese patients undergoing total hip arthroplasty at an increased risk for component malpositioning? J Arthroplasty 28(8 Suppl):41

Article  PubMed  Google Scholar 

Callanan MC, Jarrett B, Bragdon CR, Zurakowski D, Rubash HE, Freiberg AA, Malchau H (2011) The John Charnley Award: risk factors for cup malpositioning: quality improvement through a joint registry at a tertiary hospital. Clin Orthop Relat Res 469(2):319

Article  PubMed  Google Scholar 

Todkar M (2008) Obesity does not necessarily affect the accuracy of acetabular cup implantation in total hip replacement. Acta Orthop Belg 74(2):206

PubMed  Google Scholar 

Reize P, Geiger EV, Suckel A, Rudert M, Wulker N (2008) Influence of surgical experience on accuracy of acetabular cup positioning in total hip arthroplasty. Am J Orthop (Belle Mead NJ) 37(7):360

PubMed  Google Scholar 

Pirard E, De Lint JA (2007) Anteversion of the acetabular component in obese patients. Hip Int 17(2):99

Article  CAS  PubMed  Google Scholar 

Lewinnek GE, Lewis JL, Tarr R, Compere CL, Zimmerman JR (1978) Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am 60(2):217

Article  CAS  PubMed  Google Scholar 

Abdel MP, von Roth P, Jennings MT, Hanssen AD, Pagnano MW (2016) What safe zone? The vast majority of dislocated THAs are within the lewinnek safe zone for acetabular component position. Clin Orthop Relat Res 474(2):386

Article  PubMed  Google Scholar 

Danoff JR, Bobman JT, Cunn G, Murtaugh T, Gorroochurn P, Geller JA, Macaulay W (2016) Redefining the acetabular component safe zone for posterior approach total hip arthroplasty. J Arthroplasty 31(2):506

Article  PubMed  Google Scholar 

Murphy WS, Yun HH, Hayden B, Kowal JH, Murphy SB (2018) The safe zone range for cup anteversion is narrower than for inclination in THA. Clin Orthop Relat Res 476(2):325

Article  PubMed  PubMed Central  Google Scholar 

Reina N, Putman S, Desmarchelier R, Sari Ali E, Chiron P, Ollivier M, Jenny JY, Waast D, Mabit C, de Thomasson E, Schwartz C, Oger P, Gayet LE, Migaud H, Ramdane N, Fessy MH (2017) Can a target zone safer than Lewinnek’s safe zone be defined to prevent instability of total hip arthroplasties? Case–control study of 56 dislocated THA and 93 matched controls. Orthop Traumatol Surg Res 103(5):657

Article  CAS  PubMed  Google Scholar 

DelSole EM, Vigdorchik JM, Schwarzkopf R, Errico TJ, Buckland AJ (1910) Total hip arthroplasty in the spinal deformity population: does degree of sagittal deformity affect rates of safe zone placement, instability, or revision? J Arthroplasty 32(6):2017

Google Scholar 

Vigdorchik JM, Sharma AK, Madurawe CS, Pierrepont JW, Dennis DA, Shimmin AJ (2021) Prevalence of risk factors for adverse spinopelvic mobility among patients undergoing total hip arthroplasty. J Arthroplasty 36(7):2371

Article  PubMed  Google Scholar 

Zagra L, Benazzo F, Dallari D, Falez F, Solarino G, D’Apolito R, Castelli CC (2022) Current concepts in hip-spine relationships: making them practical for total hip arthroplasty. EFORT Open Rev 7(1):59

Article  PubMed  PubMed Central  Google Scholar 

Meermans G, Grammatopoulos G, Innmann M, Beverland D (2022) Cup placement in primary total hip arthroplasty: how to get it right without navigation or robotics. EFORT Open Rev 7(6):365

Article  PubMed  PubMed Central  Google Scholar 

Murray DW (1993) The definition and measurement of acetabular orientation. J Bone Joint Surg Br 75(2):228

Article  CAS  PubMed  Google Scholar 

Harris WH (1969) Traumatic arthritis of the hip after dislocation and acetabular fractures: treatment by mold arthroplasty. An end-result study using a new method of result evaluation. J Bone Joint Surg Am 51(4):737

Article  CAS  PubMed