Aim and Objective The main aim of this study was to evaluate the effect of three different types of pattern materials on the vertical marginal accuracy of complete cast crown.

Material and Methods Three groups of 20 specimens each were made based on three pattern materials, that is, blue inlay wax, autopolymerizing acrylic resin, and light cure pattern resin. Castings were made and examined using stereo microscope for vertical marginal discrepancy.

Results The result showed that the highest mean gap was noticed in the castings fabricated using inlay type B pattern wax followed by the castings fabricated using autopolymerizing resin and the least mean gap was observed in the castings fabricated using light cure modeling material.

Conclusion It was concluded from this study that the use of light cure modeling material to make patterns for casting with lost wax technique is best recommended than inlay type B pattern and autopolymerizing resin.

Publication Date:
23 November 2021 (online)

© 2021. Bhojia Dental College and Hospital affiliated to Himachal Pradesh University. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)

Thieme Medical and Scientific Publishers Pvt. Ltd.
A-12, 2nd Floor, Sector 2, Noida-201301 UP, India