Fluorescent Poly(tannic acid)-based Nanoprobe for Selective and Sensitive Detection of Bismuth Ions

Herein, the blue luminescent fluorescent poly(tannic acid) nanoparticles (FPTA NPs) were fabricated through chemical degradation of poly(tannic acid) large particles using H2O2, and the obtained FPTA NPs exhibited excellent water dispersibility, great fluorescent stability, and relatively high quantum yield. More importantly, based on the dynamic quenching and chelation enhanced quenching effect between FPTA NPs and bismuth ions (Bi3+), a fluorescence method for the rapid identification and detection of Bi3+ was developed. With the increase of Bi3+, fluorescence of FPTA NPs could be quenched gradually, the linear range was 0.2-80 μM, R2 as 0.997, and the detection limit was 13.54 nM, the response time was as short as 10 s. The FPTA NPs based nanoprobe was successfully applied for determination of Bi3+ in water samples, the recovery rate ranged from 98.18% to 105.89%, with a relative standard deviation of less than 3.48%, thereby confirming the feasibility of using FPTA NPs for detecting Bi3+ in real water samples.

You have access to this article

Please wait while we load your content... Something went wrong. Try again?

留言 (0)

沒有登入
gif