T.D. Lee, A.U. Ebong, A review of thin film solar cell technologies and challenges. Renew. Sustain. Energy Rev. 70, 1286–1297 (2017). https://doi.org/10.1016/j.rser.2016.12.028
J. Ramanujam, D.M. Bishop, T.K. Todorov, O. Gunawan, J. Rath, R. Nekovei, E. Artegiani, A. Romeo, C.I.G.S. Flexible, CdTe and a-Si:H based thin film solar cells: a review. Prog Mater. Sci. 110, 100619 (2020). https://doi.org/10.1016/j.pmatsci.2019.100619
M. Elbar, S. Tobbeche, Numerical simulation of CGS / CIGS single and tandem thin-film solar cells using the Silvaco-Atlas software. Energy Procedia. 74, 1220–1227 (2015). https://doi.org/10.1016/j.egypro.2015.07.766
M. Elbar, S. Tobbeche, A. Merazga, Effect of top-cell CGS thickness on the performance of CGS/CIGS tandem solar cell. Sol Energy. 122, 104–112 (2015). https://doi.org/10.1016/j.solener.2015.08.029
W. Koch, A.L. Endrös, D. Franke, C. Häßler, J.P. Kalejs, H.J. Möller, Bulk Crystal Growth and Wafering for PV, 2005. https://doi.org/10.1002/0470014008.ch6
M.A. Green, E.D. Dunlop, J. Hohl Ebinger, M. Yoshita, N. Kopidakis, K. Bothe, D. Hinken, M. Rauer, X. Hao, Solar cell efficiency tables (Version 60), Prog. Photovoltaics Res. Appl. 687–701 (2022). https://doi.org/10.1002/pip.3595
Z.A. Raza, Ehsan, Review of two-terminal and four-terminal crystalline-silicon/perovskite tandem solar cells; progress, challenges, and future perspectives. Energy Rep. 8, 5820–5851 (2022). https://doi.org/10.1016/j.egyr.2022.04.028
F. Rasouli, M.R. Madani, Analysis of CIGS-based thin film tandem solar cell with ZnS buffer layers. Opt. Quantum Electron. 52, 1–10 (2020). https://doi.org/10.1007/s11082-020-02590-4
J. Xiang, X. Huang, G. Lin, J. Tang, C. Ju, X. Miao, CIGS thin films for Cd-Free solar cells by one-step sputtering process. J. Electron. Mater. 43, 2658–2666 (2014). https://doi.org/10.1007/s11664-014-3108-3
M.B. Hosen, A.N. Bahar, M.K. Ali, M. Asaduzzaman, Modeling and performance analysis dataset of a CIGS solar cell with ZnS buffer layer, Data Br. 14 (2017) 246–250. https://doi.org/10.1016/j.dib.2017.07.054
M. Jošt, E. Köhnen, A. Al-Ashouri, T. Bertram, Š. Tomšič, A. Magomedov, E. Kasparavicius, T. Kodalle, B. Lipovšek, V. Getautis, R. Schlatmann, C.A. Kaufmann, S. Albrecht, M. Topič, Perovskite/CIGS Tandem Solar cells: from certified 24.2% toward 30% and beyond. ACS Energy Lett. 7, 1298–1307 (2022). https://doi.org/10.1021/acsenergylett.2c00274
S. Sharbati, I. Gharibshahian, A.A. Orouji, Designing of AlxGa1-xAs/CIGS tandem solar cell by analytical model. Sol Energy. 188, 1–9 (2019). https://doi.org/10.1016/j.solener.2019.05.074
S. Lee, S. Kim, Y. Kim, J. Park, J. Yi, Computational design of high efficiency a-Si:H/CIGS monolithic tandem solar cell. Optik (Stuttg). 173, 132–138 (2018). https://doi.org/10.1016/j.ijleo.2018.08.004
B. Bouanani, A. Joti, F.S. Bachir Bouiadjra, A. Kadid, Band gap and thickness optimization for improvement of CIGS/CIGS tandem solar cells using Silvaco software, Optik (Stuttg). 204 (2020) 164217. https://doi.org/10.1016/j.ijleo.2020.164217
M.W. Bouabdelli, F. Rogti, N. Lakhdar, M. Maache, Theoretical investigation on improvement of CIGS-based Solar cells. J. Nano- Electron. Phys. 12 no. 3, 03002 (2020). https://doi.org/10.21272/jnep.12(3).03002
M.W. Bouabdelli, F. Rogti, M. Maache, A. Rabehi, Performance enhancement of CIGS thin-film solar cell. Optik (Stuttg). 216, 164948 (2020). https://doi.org/10.1016/j.ijleo.2020.164948
B. Sara, Z. Baya, B. Zineb, Investigation of Cu(in, Ga)Se2 solar cell performance with non-cadmium buffer layer using TCAD-SILVACO. Mater. Sci. Pol. 36, 514–519 (2018). https://doi.org/10.2478/msp-2018-0054
P. Chelvanathan, M.I. Hossain, N. Amin, Performance analysis of copper-indium-gallium-diselenide (CIGS) solar cells with various buffer layers by SCAPS. Curr. Appl. Phys. 10, 387–391 (2010). https://doi.org/10.1016/j.cap.2010.02.018
S.M. Sze, K.K. Ng, Physics of Semiconductor Devices, 3rd edn. (Wiley, New Jersey, 2007)
J. Lindahl, Atomic layer deposition of zinc tin oxide buffer layers for Cu (In, Ga) Se 2 solar cells, 2015
A.D. Adewoyin, M.A. Olopade, O.O. Oyebola, M.A. Chendo, Development of CZTGS/CZTS tandem thin film solar cell using SCAPS-1D, Optik (Stuttg). 176 (2019) 132–142. https://doi.org/10.1016/j.ijleo.2018.09.033
F. Konstantinos, Modeling and simulation of a dual-junction CIGS solar cell using Silvaco Atlas. Monterey, California. Naval Postgraduate School. 2012-12
P. Singh, N.M. Ravindra, Temperature dependence of solar cell performance - an analysis. Sol Energy Mater. Sol Cells. 101, 36–45 (2012). https://doi.org/10.1016/j.solmat.2012.02.019
D. Wang, H. Guo, X. Wu, X. Deng, F. Li, Z. Li, F. Lin, Z. Zhu, Y. Zhang, B. Xu, A.K.Y. Jen, Interfacial Engineering of Wide-Bandgap Perovskites for efficient Perovskite/CZTSSe Tandem Solar cells. Adv. Funct. Mater. 32, 1–9 (2022). https://doi.org/10.1002/adfm.202107359
B. Lipovek, J. Krĉ, M. Topiĉ, Potential of advanced optical concepts in chalcopyrite-based solar cells. Energy Procedia. 2, 143–150 (2010). https://doi.org/10.1016/j.egypro.2010.07.020
M. Abderrezek, M. Fathi, F. Djahli, Comparative study of temperature effect on thin film solar cells. J. Nano- Electron. Phys. 10, 1–6 (2018). https://doi.org/10.21272/jnep.10(2).02027
K.A. Moharram, M.S. Abd-Elhady, H.A. Kandil, H. El-Sherif, Enhancing the performance of photovoltaic panels by water cooling. Ain Shams Eng. J. 4, 869–877 (2013). https://doi.org/10.1016/j.asej.2013.03.005
S.A. Zubeer, H.A. Mohammed, M. Ilkan, A review of photovoltaic cells cooling techniques, E3S web conf. 22 (2017). https://doi.org/10.1051/e3sconf/20172200205
S. Tobbeche, S. Kalache, M. Elbar, M.N. Kateb, M.R. Serdouk, Improvement of the CIGS solar cell performance: structure based on a ZnS buffer layer. Opt. Quantum Electron. 51, 1–13 (2019). https://doi.org/10.1007/s11082-019-2000-z
留言 (0)