Latz AM, et al. Shear force comparative evaluation for surface treated and non- treated 3D interim printed materials with different types of glass-ionomer cements. J Clin Exp Dent. 2020;12(10):e916–21. https://doi.org/10.4317/jced.57003.

Article  PubMed  PubMed Central  Google Scholar 

Daher R, et al. Efficiency of 3D-printed composite resin restorations compared with subtractive materials: evaluation of fatigue behavior, cost, and time of production. J Prosthet Dent. 2022. https://doi.org/10.1016/j.prosdent.2022.08.001.

Article  PubMed  Google Scholar 

Layman B, Khosravi R, Sinha P. Cost driven decision making on 3D printing appliances in-office. Seminars Orthodontics. 2022;28(2):73–9. https://doi.org/10.1053/j.sodo.2022.10.002.

Article  Google Scholar 

Tian YY, et al. A review of 3D printing in dentistry: technologies, affecting factors, and applications. Scanning. 2021. https://doi.org/10.1155/2021/9950131.

Article  PubMed  PubMed Central  Google Scholar 

Lin LW, et al. 3D Printing and digital processing techniques in dentistry: a review of literature. Adv Eng Mater. 2019. https://doi.org/10.1002/adem.201801013.

Article  Google Scholar 

Attaran M. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz. 2017;60(5):677–88. https://doi.org/10.1016/j.bushor.2017.05.011.

Article  Google Scholar 

Schweiger J, Edelhoff D, Guth JF. 3D printing in digital prosthetic dentistry: an overview of recent developments in additive manufacturing. J Clin Med. 2021;10(9):2010. https://doi.org/10.3390/jcm10092010.

Article  CAS  PubMed  PubMed Central  Google Scholar 

Paradowska-Stolarz A, et al. Mechanical properties, fractal dimension, and texture analysis of selected 3D-printed resins used in dentistry that underwent the compression test. Polymers. 2023. https://doi.org/10.3390/polym15071772.

Article  PubMed  PubMed Central  Google Scholar 

Yavuz E, Yilmaz S. New and rapidly progressing manufacturing technology in dentistry: dimensional printers. Akd Med J. 2021;7(2):197–205.

Article  Google Scholar 

Wuersching SN, et al. Initial biocompatibility of novel resins for 3D printed fixed dental prostheses. Dent Mater. 2022;38(10):1587–97. https://doi.org/10.1016/j.dental.2022.08.001.

Article  CAS  PubMed  Google Scholar 

Spitznagel FA, Boldt J, Gierthmuehlen PC. CAD/CAM ceramic restorative materials for natural teeth. J Dent Res. 2018;97(10):1082–91. https://doi.org/10.1177/0022034518779759.

Article  CAS  PubMed  Google Scholar 

Al-Dulaijan YA, et al. Comparative evaluation of surface roughness and hardness of 3D printed resins. Materials (Basel). 2022;15(19):6822. https://doi.org/10.3390/ma15196822.

Article  CAS  PubMed  Google Scholar 

Unkovskiy A, et al. Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin. Dent Mater. 2018;34(12):e324–33. https://doi.org/10.1016/j.dental.2018.09.011.

Article  CAS  PubMed  Google Scholar 

Gonder HY, Fidan M. Effect of different polymerization times on color change, translucency parameter, and surface hardness of bulk-fill resin composites. Niger J Clin Pract. 2022;25(10):1751–7. https://doi.org/10.4103/njcp.njcp_258_22.

Article  CAS  PubMed  Google Scholar 

Kanat-Erturk B. Color stability of CAD/CAM ceramics prepared with different surface finishing procedures. J Prosthodont. 2020;29(2):166–72. https://doi.org/10.1111/jopr.13019.

Article  PubMed  Google Scholar 

Tahayeri A, et al. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater. 2018;34(2):192–200. https://doi.org/10.1016/j.dental.2017.10.003.

Article  CAS  PubMed  Google Scholar 

Truszkiewicz E, et al. Mechanical behavior of 3D-printed polymeric metamaterials for lightweight applications. J Appl Polym Sci. 2022;139(6):51618.

Article  CAS  Google Scholar 

Luo MR, Cui G, Rigg B. The development of the CIE 2000 colour-difference formula: CIEDE2000. Color Res Appl. 2001;26(5):340–50. https://doi.org/10.1002/col.1049.

Article  Google Scholar 

Ozdogan A, Kaya N. Effectiveness and safety of bleaching agents on lithium disilicate glass ceramics. J Dent Res Dent Clin Dent Prospects. 2022;16(4):251–7.

Article  PubMed  PubMed Central  Google Scholar 

Puebla K, et al. Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography. Rapid Prototyp J. 2012;18(5):374–88. https://doi.org/10.1108/13552541211250373.

Article  Google Scholar 

Dimitrov D, Schreve K, de Beer N. Advances in three dimensional printing–state of the art and future perspectives. Rapid Prototyp J. 2006;12(3):136–47.

Article  Google Scholar 

Barizon KTL, et al. Ceramic materials for porcelain veneers part I: correlation between translucency parameters and contrast ratio. J Prosthet Dent. 2013;110(5):397–401.

Article  CAS  PubMed  Google Scholar 

Finan L, et al. The influence of irradiation potential on the degree of conversion and mechanical properties of two bulk-fill flowable RBC base materials. Dent Mater. 2013;29(8):906–12. https://doi.org/10.1016/j.dental.2013.05.008.

Article  CAS  PubMed  Google Scholar 

Price RB, et al. Comparison of quartz-tungsten-halogen, light-emitting diode, and plasma arc curing lights. J Adhes Dent. 2003;5(3):193–207.

PubMed  Google Scholar 

Tekce N, et al. The effect of polymerization duration on the surface hardness of three different composite materials. Turkiye Klinikleri J Dent Sci. 2015. https://doi.org/10.5336/dentalsci.2014-42565.

Article  Google Scholar 

Bilgin P, et al. The effect of two different denture cleansers on surfaca hardness of acrylic resin teeth. J Istanb Univ Fac Dent. 2007;41(1–2):65–70.

Google Scholar 

Shin DH, Rawls HR. Degree of conversion and color stability of the light curing resin with new photoinitiator systems. Dent Mater. 2009;25(8):1030–8. https://doi.org/10.1016/j.dental.2009.03.004.

Article  CAS  PubMed  PubMed Central  Google Scholar 

Schulze KA, et al. Spectroscopic analysis of polymer-ceramic dental composites after accelerated aging. Int J Prosthodont. 2003;16(4):355–61.

PubMed  Google Scholar 

Akgul S, et al. Evaluation of the effect of various beverages on the color stability and surface properties of universal resin composites. Selcuk Dent J. 2022;9(2):445–50.

Google Scholar 

Al-Samadani KH. The effect of preventive agents (mouthwashes/gels) on the color stability of dental resin-based composite materials. Dent J (Basel). 2017;5(2):18. https://doi.org/10.3390/dj5020018.

Article  PubMed  Google Scholar 

Kim D, et al. Effects of post-curing time on the mechanical and color properties of three-dimensional printed crown and bridge materials. Polymers (Basel). 2020;12(11):2762. https://doi.org/10.3390/polym12112762.

Article  CAS  PubMed  Google Scholar 

Albuquerque PP, et al. Color stability, conversion, water sorption and solubility of dental composites formulated with different photoinitiator systems. J Dent. 2013;41(Suppl 3):e67–72. https://doi.org/10.1016/j.jdent.2012.11.020.

Article  CAS  PubMed  Google Scholar 

Javaid M, Haleem A. Current status and applications of additive manufacturing in dentistry: a literature-based review. J Oral Biol Craniofac Res. 2019;9(3):179–85. https://doi.org/10.1016/j.jobcr.2019.04.004.

Article  PubMed  PubMed Central  Google Scholar 

Salgado VE, et al. Influence of photoinitiator system and nanofiller size on the optical properties and cure efficiency of model composites. Dent Mater. 2014;30(10):e264–71. https://doi.org/10.1016/j.dental.2014.05.019.

Article  CAS  PubMed  Google Scholar 

Johnston WM. Review of translucency determinations and applications to dental materials. J Esthet Restor Dent. 2014;26(4):217–23. https://doi.org/10.1111/jerd.12112.

Article  PubMed  Google Scholar 

Yu B, Lee YK. Influence of color parameters of resin composites on their translucency. Dent Mater. 2008;24(9):1236–42. https://doi.org/10.1016/j.dental.2008.01.016.

Article  CAS  PubMed  Google Scholar 

Alovisi M, et al. Influence of polymerization time on properties of dual-curing cements in combination with high translucency monolithic zirconia. J Prosthodont Res. 2018;62(4):468–72. https://doi.org/10.1016/j.jpor.2018.06.003.

Article  PubMed  Google Scholar 

Lee EH, et al. Effect of post-curing time on the color stability and related properties of a tooth-colored 3D-printed resin material. J Mech Behav Biomed Mater. 2022. https://doi.org/10.1016/j.jmbbm.2021.104993.

Article  PubMed  PubMed Central  Google Scholar