Borges H, Correia ARM, Castilho RM, Fernandes GVO (2020) Zirconia implants and marginal bone loss: a systematic review and meta-analysis of clinical studies. Int J Oral Maxillofac Implants 35(4):707–720. https://doi.org/10.11607/jomi.8097

Article  PubMed  Google Scholar 

Remísio MJS, Borges T, Castro F, Gehrke SA, Fernandes JCH, Fernandes GVO (2023) Histologic osseointegration level comparing titanium and zirconia dental implants: meta-analysis of preclinical Studies. Int J Oral Maxillofac Implants 38(4):667–680. https://doi.org/10.11607/jomi.10142

Article  PubMed  Google Scholar 

Fernandes GVO, Costa BMGN, Trindade HF, Castilho RM, Fernandes JCH (2022) Comparative analysis between extra-short implants (≤6 mm) and 6 mm-longer implants: a meta-analysis of randomized controlled trial. Aust Dent J 67(3):194–211. https://doi.org/10.1111/adj.12900

Article  PubMed  Google Scholar 

Farwell DG, Futran ND (2000) Oromandibular reconstruction. Facial Plast Surg 16(2):115–126

Article  CAS  PubMed  Google Scholar 

Kumar BP, Venkatesh V, Kumar KA, Yadav BY, Mohan SR (2016) Mandibular reconstruction: overview. J Maxillofac Oral Surg 15(4):425–441

Article  PubMed  Google Scholar 

Fernandes GVO, Castro F, Pereira RM, Teixeira W, Gehrke S, Joly JC, Carrion JB, Fernandes JCH (2023) Critical-size defects reconstruction with four different bone grafts associated with e-PTFE membrane: A histomorphometric experimental in vivo study. Clin Oral Impl Res. https://doi.org/10.1111/CLR.14210

Article  Google Scholar 

Chiapasco M, Biglioli F, Autelitano L, Romeo E, Brusati R (2006) Clinical outcome of dental implants placed in fibula-free flaps used for the reconstruction of maxillo-mandibular defects following ablation for tumors or osteoradionecrosis. Clin Oral Implants Res 17(2):220–228

Article  PubMed  Google Scholar 

Latifi F, Tabrizi R, Hosseinikordkheili M (2023) How does the number of implants affect stress distribution in fibula graft at the posterior of the mandible? a finite element analysis. J Maxillofac Oral Surg 22(2):304–312. https://doi.org/10.1007/s12663-022-01743-0

Article  PubMed  Google Scholar 

Alqahtani AR, Desai SR, Patel JR, Alqhtani NR, Alqahtani AS, Heboyan A, Fernandes GVO, Mustafa M, Karobari MI (2023) Investigating the impact of diameters and thread designs on the Biomechanics of short implants placed in D4 bone: a 3D finite element analysis. BMC Oral Health 23(1):686. https://doi.org/10.1186/s12903-023-03370-8

Article  PubMed  PubMed Central  Google Scholar 

Desai SR, Koulgikar KD, Alqhtani NR, Alqahtani AR, Alqahtani AS, Alenazi A, Heboyan A, Fernandes GVO, Mustafa M (2023) Three-dimensional FEA analysis of the stress distribution on titanium and graphene frameworks supported by 3 or 6-implant models. Biomimetics 8:15. https://doi.org/10.3390/biomimetics8010015

Article  CAS  PubMed  PubMed Central  Google Scholar 

Gehrke SA, Dedavid BA, Fernandes GVO (2021) A new design of a multifunctional abutment to morse taper implant connection: experimental mechanical analysis. J Mechan Behavior Biomed Mat 116:104347. https://doi.org/10.1016/j.jmbbm.2021.104347

Article  CAS  Google Scholar 

Chang Y, Tambe AA, Maeda Y, Wada M, Gonda T (2018) Finite element analysis of dental implants with validation: to what extent can we expect the model to predict biological phenomena? A literature review and proposal for classification of a validation process. Int J Implant Dent 4(1):7

Article  PubMed  PubMed Central  Google Scholar 

Cepic LZ, Frank M, Reisinger A, Pahr D, Zechner W, Schedle A (2022) Biomechanical finite element analysis of short-implant-supported, 3-unit, fixed CAD/CAM prostheses in the posterior mandible. Int J Implant Dent 8:8. https://doi.org/10.1186/s40729-022-00404-8

Article  Google Scholar 

Choi S-M, Choi H, Lee D-H, Hong M-H (2021) Comparative finite element analysis of mandibular posterior single zirconia and titanium implants: a 3-dimensional finite element analysis. J Adv Prosthodont 13(6):396–407. https://doi.org/10.4047/jap.2021.13.6.396

Article  PubMed  PubMed Central  Google Scholar 

Pirjamalineisiani A, Sarafbidabad M, Jamshidi N, Esfahani FA (2017) Finite element analysis of post dental implant fixation in drilled mandible sites. Comput Biol Med 81:159–166. https://doi.org/10.1016/j.compbiomed.2016.11.012

Article  PubMed  Google Scholar 

Rho JY, Ashman RB, Turner CH (1993) Young’s modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. J Biomech 26(2):111–119

Article  CAS  PubMed  Google Scholar 

Nagasao T, Kobayashi M, Tsuchiya Y, Kaneko T, Nakajima T (2002) Finite element analysis of the stresses around endosseous implants in various reconstructed mandibular models. J Craniomaxillofac Surg 30(3):170–177

Article  CAS  PubMed  Google Scholar 

Park YS, Kwon HB (2013) Three-dimensional finite element analysis of implant-supported crown in fibula bone model. J Adv Prosthodont 5(3):326–332

Article  PubMed  PubMed Central  Google Scholar 

Wu JC, Chen CS, Yip SW, Hsu ML (2012) Stress distribution and micromotion analyses of immediately loaded implants of varying lengths in the mandible and fibular bone grafts: a three-dimensional finite element analysis. Int J Oral Maxillofac Implants 27(5):e77-84

PubMed  Google Scholar 

Walsh K, Jar C, Vafaeian B, Wolfaardt J, Aalto D, Adeeb S (2019) Use of patient-specific finite element models in dental rehabilitation to investigate stresses of a fibula free flap for mandibular reconstruction. Int J Oral Maxillofac Implants 34(3):e21–e31

Article  PubMed  Google Scholar 

Nesappan T, Ariga P (2014) Comparison of stresses around dental implants placed in normal and fibula reconstructed mandibular models using finite element analysis. J Clin Diagn Res 8(8):Zc45-50

PubMed  PubMed Central  Google Scholar 

Menicucci G, Mossolov A, Mozzati M, Lorenzetti M, Preti G (2002) Tooth-implant connection: some biomechanical aspects based on finite element analyses. Clin Oral Implants Res 13(3):334–341

Article  PubMed  Google Scholar 

Geng JP, Tan KB, Liu GR (2001) Application of finite element analysis in implant dentistry: a review of the literature. J Prosthet Dent 85(6):585–598

Article  CAS  PubMed  Google Scholar 

Papavasiliou G, Kamposiora P, Bayne SC, Felton DA (1997) 3D-FEA of osseointegration percentages and patterns on implant-bone interfacial stresses. J Dent 25(6):485–491

Article  CAS  PubMed  Google Scholar 

Eazhil R, Swaminathan SV, Gunaseelan M, Kannan GV, Alagesan C (2016) Impact of implant diameter and length on stress distribution in osseointegrated implants: a 3D FEA study. J Int Soc Prev Community Dent 6(6):590–596

Article  CAS  PubMed  PubMed Central  Google Scholar 

Rosen EB, Kyle Gazdeck R, Goldman DA, Panchal H, Jones E, Nguyen JP et al (2022) An anatomic analysis of fibula flap mandible reconstructions: implications for endosseous implant placement. Plast Reconstr Surg 149(6):1419–1428

Article  CAS  PubMed  PubMed Central  Google Scholar 

Sugiura T, Yamamoto K, Horita S, Murakami K, Kirita T (2018) Micromotion analysis of different implant configuration, bone density, and crestal cortical bone thickness in immediately loaded mandibular full-arch implant restorations: a nonlinear finite element study. Clin Implant Dent Relat Res 20(1):43–49

Article  PubMed  Google Scholar 

Shokri T, Stahl LE, Kanekar SG, Goyal N (2019) Osseous changes over time in free fibular flap reconstruction. Laryngoscope 129(5):1113–1116

Article  PubMed  Google Scholar 

Kumar VV, Ebenezer S, Kämmerer PW, Jacob PC, Kuriakose MA, Hedne N et al (2016) Implants in free fibula flap supporting dental rehabilitation—Implant and peri-implant related outcomes of a randomized clinical trial. J Craniomaxillofac Surg 44(11):1849–1858

Article  PubMed  Google Scholar