Abstract

The arthroscopic Bankart repair is a safe and reliable procedure for the treatment of recurrent shoulder instability for the well-indicated patient. Many repair techniques have been described to restore both labral height and width and recreate a dynamic concavity–compression effect. The modified Mason–Allen knot was first described for rotator cuff tear repair and consists of a horizontal mattress knot with a simple vertical stitch on the same anchor. The purpose of this work is to present the use of the modified Masen–Allen knot for the repair of the capsular labral complex during an arthroscopic Bankart procedure.

Recurrent anterior dislocation of the shoulder is a frequent condition among young and active patients and can be caused by many different anatomical lesions, from the classical anterior Bankart tear to more complex capsular–labral tear, which may include posterior and anterior lesions. In the absence of a bony defect, and if the patient does not present any specific risk of postoperative failure, a Bankart repair can be proposed, which has a failure rate of 4% to 35%.1Sheean A.J. De Beer J.F. Di Giacomo G. Itoi E. Burkhart S.S. Shoulder instability: State of the art.The suture anchor is currently the gold standard when considering the surgical treatment of capsular–labral lesions. To ensure the best result for the arthroscopic Bankart repair the capsular labral tissue quality must be assessed as the anterior glenoid neck bone loss. The success of this surgery hinges on the restoration of a satisfying capsule labral anatomy to adequately restore the efficiency of the inferior glenohumeral ligament.2Bahk M.S. Karzel R.P. Snyder S.J. Arthroscopic posterior stabilization and anterior capsular plication for recurrent posterior glenohumeral instability., 3Kim J.Y. Chung S.W. Kwak J.Y. Morphological characteristics of the repaired labrum according to glenoid location and its clinical relevance after arthroscopic Bankart repair: Postoperative evaluation with computed tomography arthrography., 4Park J.Y. Lee S.J. Lhee S.H. Oh J.H. Change in labrum height after arthroscopic Bankart repair: Correlation with preoperative tissue quality and clinical outcome., 5Wiesel B.B. Gartsman G.M. Press C.M. et al.What went wrong and what was done about it: Pitfalls in the treatment of common shoulder surgery.The modified Mason–Allen technique was first described by Schneeberger et al.6Schneeberger A.G. Beck M. Gerber C. In-vitro stability of rotator cuff repair techniques. for rotator cuff repair, with good clinical outcomes and biomechanical results.7Hawi N. Dratzidis A. Kraemer M. et al.Biomechanical evaluation of the simple cinch stitch for arthroscopic rotator cuff repair.,8Porto Fde M. Alves M.W. de Andrade A.L. Evaluation of patients undergoing rotator cuff suture with the modified Mason-Allen technique. In this indication, it is also known as BRUMA (Bankart lesion Repair Using a modified Mason–Allen stitch) and is defined as the combination of a simple stitch positioned in the middle of a horizontal mattress suture which is supposed to constitute a blockage in order to reduce the risk of cutting through capsular–labral tissue. It is supposed to improve the tissue-holding properties.9Castagna A. Conti M. Mouhsine E. Delle Rose G. Massazza G. Garbofalo R. A new technique to improve tissue grip and contact force in arthroscopic capsulolabral repair: The MIBA stitch. A double-loaded suture anchor is needed, and the horizontal mattress suture needs to be performed before the simple vertical stitch.9Castagna A. Conti M. Mouhsine E. Delle Rose G. Massazza G. Garbofalo R. A new technique to improve tissue grip and contact force in arthroscopic capsulolabral repair: The MIBA stitch. We already have reported the good long-term outcome at 10 years’ follow-up in a previous publication.10Bastard C. Herisson O. Gaillard J. Nourissat G. Impact of remplissage on global shoulder outcome: A long-term comparative study.The rational of the modified Mason–Allen knot is that it’s supposed to prevent failure of the suture by restoring the capsular–labral tension, on the ligament and on the labrum, better than with the use of simple sutures.9Castagna A. Conti M. Mouhsine E. Delle Rose G. Massazza G. Garbofalo R. A new technique to improve tissue grip and contact force in arthroscopic capsulolabral repair: The MIBA stitch. The main advantages and disadvantages of both the modified Mason–Allen knot and simple vertical stitch are given in Table 1. The objective of this Technical Note is to show how we use the modified Mason–Allen knot technique during the treatment of an anterior and posterior complex Bankart lesion.

Table 1Advantages of the Modified Mason–Allen Stitch Compared With the Simple Stitch

Surgical Technique Clinical Diagnosis and Imaging

The clinical assessment of the recurrent anterior shoulder instability must be performed with a standard clinical evaluation, including the administration of an anterior apprehension test, a relocation test, hyperlaxity, and associated posterior or multidirectional shoulder instability. Preoperative staging includes standard radiographs of the shoulder associated with an arthro-computed tomography scan to identify the Bankart lesion and to ensure the absence of bony lesion, which may contraindicate the arthroscopic repair of the capsulolabral complex.

 Patient Positioning

The patient undergoes an ultrasound-guided interscalene brachial plexus block combined with general anesthesia with a laryngeal mask airway. The surgical procure is performed with the patient placed in a supine position with the medial edge of the scapula stabilized on the table. A SPIDER 2 Limb positioner device (Smith & Nephew, Andover, MA) is used to allow the mobilization the operated upper limb, which is included entirely in the surgical field.

 Surgical Procedure (With Video Illustration)The surgical procedure is shown in Video 1. The usual posterior arthroscopic portal in the soft point is made to explore the glenohumeral joint with a 30° scope, associated with a classical anterior instrumental portal in the rotator interval. During exploration, the lesions of both anterior and posterior capsulolabral complex must be identified (Fig 1). It is mandatory to make with the rasp a complete release of the labrum both anteriorly and posteriorly by pulling the capsular–labral tissue. After the entire lesion assessment, we use a motorized shaver to remove all the soft tissues from the anterior and medial walls of the glenoid rim, and a rasp is used to perform abrasion of the bone to optimize the healing potency of the ligament. The muscular fibers of the subscapularis are visualized to confirm the good release of soft tissues. An all-suture double loaded anchor (SUTUREFIX ULTRA, 1.7 mm; Smith & Nephew) is placed at the 5-o’clock position. To start the modified Mason–Allen suture, a FIRSTPASS ST (Smith & Nephew) suture passer is used to perform the proximal and the distal passing suture of the mattress suture. A space of approximately 5 mm must be maintained between the 2 suture passages of the mattress knot. The same device is then used to pass the thread for the simple vertical stitch over the mattress knot at its center between the 2 anteriorly passed threads (Fig 2). The horizontal mattress knot and the classical simple sliding vertical stitch can then be tied. A second modified Mason–Allen stitch is always performed more proximally at the 3- or 4-o’clock position following the same procedure at approximately 5 mm superiorly to the previous passage. A classical vertical stitch can be performed on a third suture anchor to conclude the whole suture if there is a proximal extend of the anterior Bankart lesion on the glenoid rim (Fig 3). We recommend the use of a canula in the anterior portal to prevent the entanglement of the suture in the soft tissues.

Fig 1Complex capsular and labral lesions visualized through a classical posterior portal. On the left, an anterior lesion of the labrum is shown, and on the right a posterior lesion of the labrum is shown. The green cross indicates the humeral head, and the blue cross indicates the glenoid cavity. The patient is positioned in the supine position, and this orientation is shown.

Fig 2Arthroscopic views of the modified Mason–Allen knot technique for Bankart repair using a specific suture passer device. On the left and in the middle panels, realization of the both superior and inferior passing of the horizontal mattress knot is shown. An approximative length of 5 mm must be maintain between the 2 threads. On the right (white thread), passing of the suture of the vertical simple stitch in the middle of the 2 previous passed threads is shown. We recommend tying the horizontal mattress knot first and then the simple vertical stitch. The patient is positioned in the supine position, and this orientation is shown.

Fig 3For an extended anterior capsulolabral anterior Bankart lesion, the adjunction of a simple vertical stitch may be needed in adjunction with the modified Mason–Allen knot when there is no space left for the use of an automatic suture retriever. After positioning a single- or double-loaded all-suture anchor in the glenoid bone at the level of the labral lesion, a Sixter hook (DePuy-Mitek) is use to pass the thread (on the left) and can then be classically tied (on the right). The patient is positioned in the supine position, and this orientation is shown.

Then the posterior part of the glenoid rim is assessed by switching the scope through the anterior portal. In almost 75% of cases, a posterior Bankart lesion is treated with a Mason–Allen suture. In most cases, a Sixter hook (DePuy-Mitek, Raynham, MA) must be used because automatic suture retriever is too large to be used in this narrow space. When necessary, classical simple vertical stitches can be used if the posterior Bankart lesion is extend superiorly. At the end of the procedure, good restoration of height and width of the capsulolabral complex can be controlled (Fig 4). The pearls and pitfalls for a stepwise approach to the surgical technique of the modified Mason–Allen knot for a complex labral repair are given in Table 2.

Fig 4Visualization of the result of 2 modified Mason–Allen knots for the anterior Bankart repair associated with a superior simple vertical stitch for the treatment of a complex anterior Bankart lesion (with the arthroscope positioned in the posterior portal on the left and in the anterior and lateral portal on the right). It is possible to visualize the bump effect following this type of repair with the good restoration of both width and height of the capsulolabral complex. The patient is positioned in the supine position, and this orientation is shown.

Table 2Pearls and Pitfalls for a Stepwise Approach of the Modified Mason–Allen Knot for the Arthroscopic Treatment of Complex Bankart Lesion

 Rehabilitation

The patient is immobilized with a shoulder immobilizer for 3 weeks. Then, the passive physiotherapy without external rotation is follow for 3 weeks. At 6 weeks, active mobilization is permitted and the immobilizer is removed. Patients are monitored with clinical follow-up after 3 weeks and 3, 6, and 12 months.

DiscussionIt has been demonstrated that one of the main objectives of the Bankart repair procedure is to restore the labral height, which is in the case of a modified Mason–Allen technique mainly dependent on the horizontal mattress suture.3Kim J.Y. Chung S.W. Kwak J.Y. Morphological characteristics of the repaired labrum according to glenoid location and its clinical relevance after arthroscopic Bankart repair: Postoperative evaluation with computed tomography arthrography. It increases the glenohumeral joint stability and achieves better labral anatomy restoration. To stabilize the glenohumeral joint, the restoration of the labral height is important to create a new concavity. Previous anatomical studies have shown that the Mason–Allen suture is associated with better restoration of the labral height, restoring the concavity–compression functions of the labrum, and leading to increased functional outcome and glenohumeral stability.3Kim J.Y. Chung S.W. Kwak J.Y. Morphological characteristics of the repaired labrum according to glenoid location and its clinical relevance after arthroscopic Bankart repair: Postoperative evaluation with computed tomography arthrography.,11Boddula M.R. Adamson G.J. Gupta A. McGarry M.H. Lee T.Q. Restoration of labral anatomy and biomechanics after superior labral anteriorposterior repair: Comparison of mattress versus simple technique.,12Lazarus M.D. Sidles J.A. Harryman 2nd, D.T. Matsen 3rd, F.A. Effect of a chondral-labral defect on glenoid concavity and glenohumeral stability: A cadaveric model. In a cadaveric study, Metcalf et al.13Metcalf M.H. Pon J.D. Harryman 2nd, D.T. Loutzenheiser T. Sidles J.A. Capsulolabral augmentation increases glenohumeral stability in the cadaver shoulder. measured glenohumeral range of motion, glenolabral depth, and resistance to humeral head displacement before and after a capsulolabral augmentation and demonstrated an increase in the stability of the humeral head within the glenolabral fossa by local capsular augmentation. They also concluded that the capsulolabral augmentation limits glenohumeral motion due to a simultaneous reduction in capsular laxity.The prevention of the cutting through the capsular–labral tissue and the improvement of the tissue-holding power was first described by Castagna et al.9Castagna A. Conti M. Mouhsine E. Delle Rose G. Massazza G. Garbofalo R. A new technique to improve tissue grip and contact force in arthroscopic capsulolabral repair: The MIBA stitch. They described the MIBA stitch using a double-loaded suture and composed of a horizontal mattress stitch in a “south-to-north” direction in association with an overlapping single vertical stitch passing through the capsular–labral complex to improve the contact force applied on these tissues over the glenoid bone. They concluded that in their clinical experience this procedure led to a good capsular–labral shift with a good grip of this stitch. The surgical time was not increased according to the authors.

The superiority of the horizontal mattress suture over the simple stitch has been demonstrated in previous studies both on the increased stability to the glenohumeral repair by recreating glenolabral concavity and in restoring the labral anatomy and height. Thus, it seems logical to believe that the modified Mason–Allen technique would have an even better mechanical superiority. The second stitch is used to fix the inferior glenohumeral ligament independently of the labrum. It can be useful when the labrum is torn or of bad quality.

In a recent prospective randomized trial study comparing 45 patients allocated to simple vertical stitch with 41 patients allocated to the modified Mason–Allen stitch for the treatment of Bankart lesions, Park et al.14Park J.Y. Chung S.W. Lee J.S. Oh K.S. Lee J.H. Comparison of clinical and radiographic outcomes of vertical simple stitch versus modified Mason–Allen stitch in arthroscopic Bankart repairs: A prospective randomized controlled study. didn’t succeed in proving the superiority of one of the sutures compared with the other, both on clinical and the radiologic outcomes at least 2 years postoperatively.Lai et al.15Lai M.C. Ang F.H.B. Lee K.H. Chang C.C.P. Lie T.T.D. Hybrid suture technique vs simple suture technique for antero-inferior labral tears: Two years' clinical outcomes. also compared retrospectively 65 patients who underwent a hybrid suture to create a Mason–Allen configuration with 38 patients who have had a simple vertical suture technique for an anterior labral repair. At 2 years’ follow-up, the both techniques showed similar results concerning the recurrence rate and a significant improvement of the postoperative clinical scores compared with the preoperative ones. The early clinical scores at 3 months’ postoperative were thus significantly improved in the group of patients treated with a Mason–Allen suture technique. We reported less than 5% recurrence after such Bankart procedure, with or without Hill–Sachs remplissage, at minimum 10 years’ follow-up using the MIBA stitch.10Bastard C. Herisson O. Gaillard J. Nourissat G. Impact of remplissage on global shoulder outcome: A long-term comparative study.Siripipattanamongkol et al.16Siripipattanamongkol P. Wongtriratanachai P. Nimkingratana P. Phornphutkul C. Arthroscopic Bankart repair: A matched cohort comparison of the modified Mason Allen method and the simple stitch method. in a retrospective cohort study compared a group of 50 patients who underwent modified Mason–Allen Stitch for arthroscopic Bankart repair with a group of 30 patients who underwent a simple stitch arthroscopic Bankart repair and found in both groups excellent patient satisfaction and shoulder stability restoration at a minimum 2-year follow-up. The modified Mason–Allen stitch was, however, associated with better functional outcomes at the final follow-up, with a significantly improved Walch–Duplay score (87.2 vs 82.0; P = .035) and Rowe score (respectively 86.8 vs 76.3; P = .001) and a nonsignificant trend for a lower failure rate with, respectively, 6% and 10% (P = .511).

The use of a specific suture passer may be a limit of the presented surgical procedure due to it being the most expensive. The use of this specific device may help the surgeon; nevertheless, we do not believe that its use is mandatory.

Conclusions

Long-term clinical studies demonstrate the good clinical outcomes of patients operated with a Mason–Allen labral repair. It provides double independent fixation of the labrum and of the inferior glenohumeral ligament to better restore labral height and width. It’s supposed to improve the contact force applied on repaired capsulolabral tissue over the glenoid bone. It has shown to be a safe and reproducible procedure to treat recurrent anterior instability in both classical isolated anterior Bankart lesions and in more complex anterior and posterior capsulolabral lesions.

Supplementary Data

Video 1

In a complex capsulolabral lesion faced in recurrent anterior shoulder instability, the modified Mason–Allen stitch is useful to better restore both the height and width of the capsulolabral complex to recreate a dynamic concavity–compression effect. First, a modified Mason–Allen knot is performed on an all-suture double-loaded anchor positioned at the 5-o’clock position. It is composed of the association of a horizontal mattress knot with a passing of a superior and an inferior thread separated by 5 mm. An overlapping simple vertical stitch is passed over the mattress knot with the tread passed in the middle of the both anteriorly passed threads. The horizontal mattress knot and the simple vertical stitch can then be tied. The same procedure is repeated at the 3- or 4-o’clock position. If needed, a simple stitch can be used to treat the concomitant anterior extent of the lesion or a posterior capsulolabral lesion.

ReferencesSheean A.J. De Beer J.F. Di Giacomo G. Itoi E. Burkhart S.S.

Shoulder instability: State of the art.

J ISAKOS. 1: 347Bahk M.S. Karzel R.P. Snyder S.J.

Arthroscopic posterior stabilization and anterior capsular plication for recurrent posterior glenohumeral instability.

Arthroscopy. 26: 1172-1180Kim J.Y. Chung S.W. Kwak J.Y.

Morphological characteristics of the repaired labrum according to glenoid location and its clinical relevance after arthroscopic Bankart repair: Postoperative evaluation with computed tomography arthrography.

Am J Sports Med. 42: 1304-1314Park J.Y. Lee S.J. Lhee S.H. Oh J.H.

Change in labrum height after arthroscopic Bankart repair: Correlation with preoperative tissue quality and clinical outcome.

J Shoulder Elbow Surg. 21: 1712-1720Wiesel B.B. Gartsman G.M. Press C.M. et al.

What went wrong and what was done about it: Pitfalls in the treatment of common shoulder surgery.

J Bone Joint Surg Am. 95: 2061-2070Schneeberger A.G. Beck M. Gerber C.

In-vitro stability of rotator cuff repair techniques.

Orthopade. 24 (): 268-274Hawi N. Dratzidis A. Kraemer M. et al.

Biomechanical evaluation of the simple cinch stitch for arthroscopic rotator cuff repair.

Clin Bio- mech (Bristol, Avon). 36: 21-25Porto Fde M. Alves M.W. de Andrade A.L.

Evaluation of patients undergoing rotator cuff suture with the modified Mason-Allen technique.

Acta Ortop Bras. 21: 167-169Castagna A. Conti M. Mouhsine E. Delle Rose G. Massazza G. Garbofalo R.

A new technique to improve tissue grip and contact force in arthroscopic capsulolabral repair: The MIBA stitch.

Knee Surg Sports Traumatol Arthrosc. 16: 415-419Bastard C. Herisson O. Gaillard J. Nourissat G.

Impact of remplissage on global shoulder outcome: A long-term comparative study.

Arthroscopy. 35: 1362-1367Boddula M.R. Adamson G.J. Gupta A. McGarry M.H. Lee T.Q.

Restoration of labral anatomy and biomechanics after superior labral anteriorposterior repair: Comparison of mattress versus simple technique.

Am J Sports Med. 40: 875-881Lazarus M.D. Sidles J.A. Harryman 2nd, D.T. Matsen 3rd, F.A.

Effect of a chondral-labral defect on glenoid concavity and glenohumeral stability: A cadaveric model.

J Bone Joint Surg Am. 78: 94-102Metcalf M.H. Pon J.D. Harryman 2nd, D.T. Loutzenheiser T. Sidles J.A.

Capsulolabral augmentation increases glenohumeral stability in the cadaver shoulder.

J Shoulder Elbow Surg. 10: 532-538Park J.Y. Chung S.W. Lee J.S. Oh K.S. Lee J.H.

Comparison of clinical and radiographic outcomes of vertical simple stitch versus modified Mason–Allen stitch in arthroscopic Bankart repairs: A prospective randomized controlled study.

Am J Sports Med. 47: 398-407Lai M.C. Ang F.H.B. Lee K.H. Chang C.C.P. Lie T.T.D.

Hybrid suture technique vs simple suture technique for antero-inferior labral tears: Two years' clinical outcomes.

Asia Pac J Sports Med Arthrosc Rehabil Technol. 18: 6-10Siripipattanamongkol P. Wongtriratanachai P. Nimkingratana P. Phornphutkul C.

Arthroscopic Bankart repair: A matched cohort comparison of the modified Mason Allen method and the simple stitch method.

Asia Pac J Sports Med Arthrosc Rehabil Technol. 22: 49-55Article InfoPublication History

Published online: July 13, 2021

Accepted: April 3, 2021

Received: February 18, 2021

Publication stageIn Press Corrected ProofFootnotes

The authors report that they have no conflicts of interest in the authorship and publication of this article. Full ICMJE author disclosure forms are available for this article online, as supplementary material.

Identification

DOI: https://doi.org/10.1016/j.eats.2021.04.018

Copyright

© 2021 by the Arthroscopy Association of North America. Published by Elsevier.

User License Creative Commons Attribution – NonCommercial – NoDerivs (CC BY-NC-ND 4.0) | How you can reuse Permitted For non-commercial purposes: Read, print & download Redistribute or republish the final article Text & data mine Translate the article (private use only, not for distribution) Reuse portions or extracts from the article in other worksNot PermittedSell or re-use for commercial purposes Distribute translations or adaptations of the article
Elsevier's open access license policy ScienceDirectAccess this article on ScienceDirect Related Articles