Mechanical Analysis of a Novel 3D-printed External Fixator Design Versus Industry-standard External Fixators

From the Sanford Orthopaedics and Sports Medicine, Sioux Falls, SD (Mr. Adams and Dr. Skelley), University of South Dakota Sanford School of Medicine, Sioux Falls, SD (Dr. MacFadden, Mr. O’Connor, Ms. VanDerWolde, and Dr. Skelley), University of South Dakota, Department of Biomedical Engineering, Sioux Falls, SD (Dr. MacFadden and Dr. Skelley), Viaflex, Sioux Falls, SD (Mr. Boerhave).

Correspondence to Dr. Skelley: [email protected]

The University of South Dakota Development Grant—Funded Filament utilized in this study.

Dr. Skelley is a consultant to CONMED Corporation on topics not related to the presented material in this manuscript. None of the following authors or any immediate family member has received anything of value from or has stock or stock options held in a commercial company or institution related directly or indirectly to the subject of this article: All other authors have no conflicts of interest. Dr. MacFadden, Mr. Adams, Mr. O’Connor, Mr. Boerhave, and Ms. VanDerWolde.

Sources of support: The American Orthopaedic Society for Sports Medicine and the Aircast Foundation assisted with obtaining equipment and filament utilized in this study.

留言 (0)

沒有登入
gif