GOST (State Standard) ISO 25239-1-2020. Friction welding with mixing. Aluminum. Part 1. Vocabularly, 2020.

GOST (State Standard) ISO 25239-2-2020. Friction welding with mixing. Aluminum. Part 2. Construction of welded joints, 2020.

GOST (State Standard) ISO 25239-3-2020. Friction welding with mixing. Aluminum. Part 3. Certification of welders–operators, 2020.

GOST (State Standard) ISO 25239-4-2020. Friction welding with mixing. Aluminum. Part 4. Technical requirements and certification of welding procedures, 2020.

GOST (State Standard) ISO 25239-5-2020. Friction welding with mixing. Aluminum. Part 5. Quality and control requirements, 2020.

Borovkov, A.I., Bychenok, V.A., Prokhorovich, V.E., Fedorov, A.V., Oxenyuk, A.S., Mayorov, A.L., Berkutov, I.V., and Alifirenko, E.A., The role of friction welding with mixing in the production of products of the rocket and space industry, Svarka Diagn., 2022, no. 3, pp. 36–42.

Sergeeva, E.V., Friction welding with mixing in the aerospace industry (review), Avtom. Svarka, no. 5, 2013, pp. 58–62.

Varochko, A.G., Kuznetsov, S.V., Prokhorovich, V.E., Polovtsev, V.A., Bychenok, V.A., and Saratov, N.N., History of formation and prospects of development of friction mixing welding technology in JSC “M.V. GKNPC Khrunicheva,” Tekhnologiya Mashinostroeniya, Svarochnoye Proizvodstvo i Rodstvennye Protsessy, 2021, no. 4, pp. 16–41.

Albannai Abdulaziz, I., Review of the common defects in friction stir welding, Int. J. Sci. Technol. Res., 2020, no. 9, pp. 318–329.

Zhang, H., Luo, S., and Xu, W., Influence of welding speed on zigzag line feature and tensile property of a friction-stir-welded Al–Zn–Mg aluminum alloy, J. Mater. Eng. Perform., 2019, no. 28, pp. 1790–1800.

Soni Neetesh, Chandrashekhar Sangam, Kumar, A., and Chary, V.R., Defects formation during friction stir welding: a review, Int. J. Eng. Manage. Res., 2016, no. 10, pp. 121–125.

Kah Paul, Rajan Richard, Martikainen Jukka, and Suoranta Raimo, Investigation of weld defects in friction stir welding and fusion welding of aluminium alloys, Int. J. Mech. Mater. Eng., 2015, no. 12, pp. 1–10.

Polovtsev, V.A., Makarov, N.V., Shillo, G.V., Sabantsev, A.N., Smirnova, T.N., and Strikman, M.M., Friction welding of aluminum liners of high-pressure metal composite cylinders, Svar. Proizvod., 2007, no. 12, pp. 25–27.

El-Sayed Mostafa, M., Shash, A.Y., Abd-Rabou, M., and El Sherbiny Mahmoud, G., Welding and processing of metallic materials by using friction stir technique: A review, J. Adv. Joining Proces., 2021, vol. 3, p. 100059.

Industry Standard OST 134-1051-2010. Friction welding. Technical requirements for welded joints, 2010.

Al-Moussawi, M. and Smith, A.J., Defects in friction stir welding of steel, Metallogr. Microstruct. Anal., 2018, no. 7, pp. 194–202.

Kumar Ratnesh, Chattopadhyaya Somnath, Hloch Sergej, Krolczyk Grzegorz, and Legutko Stanislaw, Wear characteristics and defects analysis of friction stir welded joint of aluminium alloy 6061-T6, Eksploatacja I Niezawodnosc, 2016, no. 18, pp. 128–135.

Khan Noor Zaman, Khan Zahid, A., Siddiquee Arshad Noor, AL-Ahmar Abdulrahman, M., and Abidi Mustufa, H., Analysis of defects in clean fabrication process of friction stir welding, Trans. Nonferrous Met. Soc. China, 2017, vol. 27, no. 7, pp. 1507–1516.

Eliseev, A.A., Regularities of structural-phase transformations in heat-strengthened aluminum alloys during friction welding with mixing with ultrasonic action, Cand. Sci. (Eng.) Dissertation, Tomsk, 2018.

Sewell Neil, Wright Julian, and Wright Jonathan, Detection of kissing bonds in friction stir welds, 11th Int. Symp. Friction Stir Weld. (Cambridge, 2016).

Santos Mário and Santos Jaime, Lamb waves technique applied to the characterization of defects in friction stir welding of aluminum plates: comparison with X-ray and ultrasonic C-scan, J. Test. Eval., 2010, vol. 38, no. 5, pp. 1–7.

Google Scholar 

Stepanova, K.A., Kinzhagulov, I.Yu., Yakovlev, Yu.O., Kovalevich, A.S., Ashikhin, D.S., and Alifanova, I.E., Applying laser-ultrasonic and acoustic-emission methods to nondestructive testing at different stages of deformation formation in friction stir welding, Russ. J. Nondestr. Test., 2020, vol. 56, no. 3, pp. 191–200.

Article  CAS  Google Scholar 

Lévesque, D., Dubourg, L., and Blouin, A., Laser ultrasonics for defect detection and residual stress measurement of friction stir welds, Nondestr. Test. Eval., 2011, vol. 26, nos. 3–4, pp. 319–333.

NDT Control. The method of ultrasonic inspection of welded joints obtained by friction welding with mixing, using phased array technology. https://ndt-control.ru/2018/05/06/metodika-ultrazvukovogo-kontrolya-svarnyxsoedinenij-poluchennyx-svarkoj-treniem-s-peremeshivaniem-s-ispolzovaniem-texnologii-fazirovannojantennoj-reshetki. Cited December 21, 2021.

Hand-held ultrasonic spot welding control devices. http://activetest.ru/spotweld_systems/. Cited January 17, 2023.

Platform Tessonics. https://www.tessonics.com/products/f1. Cited January 17, 2023.

Olympus. Spot welding. https://www.olympus-ims.com/ru/spot-weld-testing. Cited January 17, 2022.

GOST (State Standard) 14797-85. Rivets with a semicircular head (increased accuracy). Design and dimensions, 1986.

GOST (State Standard) 14803-85. Rivets (high precision). General technical conditions, 1986.