Health risk management framework for heavy metals and cyanide in Kwekwe city of Zimbabwe: a mixed-method study protocol

A convergent parallel mixed-method design will be used to collect, analyse, compare, and merge qualitative and quantitative data to understand the research problem [29]. The convergent parallel mixed-method process is summarised in Table 1. This design is appropriate since qualitative and quantitative data would complement each other, help explain the health risks associated with potentially toxic elements, and the development of a health risk management framework. The study has two phases, and the first phase will involve gathering data from the environmental and community health surveys. The second phase will use the data gathered in phase one to inform the development and validation of the health risk management scheme.

Table 1 Outline of convergent parallel mixed-method design process

Mixed-method research approach would be used in the study and will enable the researcher to collect, analyse, and integrate both quantitative and qualitative data in the study as shown in Fig. 1.

Fig. 1figure 1

Research approach for developing a management framework for heavy metals and cyanide risks

Setting

Kwekwe city lies between 18° 92′ S latitude and 29° 81′ E longitude and was established in 1898 by the British South African Company as a mining town due to the large gold deposits in the area. The geology of the area is known as the Rhodesdale gneiss terrain, which underlies the entire city [30]. Globe and Phoenix Gold Mine, which was started in 1894 by Edward Thornton and Joseph Schukala [31], spearheaded the industrial development of Kwekwe city to its present position as one of Zimbabwe's mining and industrial centres as shown in Fig. 2. Kwekwe city was purposively chosen as the study area due to its land-use activities, which include mining, metallurgical processing and heavy industrial manufacturing. Artisanal gold mining is widespread in the area, and many parts of the city bear scars of unregulated mining in the form of dumps, open pits, and damaged infrastructure. Large quantities of mercury and cyanide are used to extract gold from the ore, and much of these chemicals end up in the environment.

Fig. 2figure 2

GIS Map of Kwekwe City, Zimbabwe (Nkosana Khumalo)

Phase 1(a): systematic literature reviewReview title: risk management frameworks for potentially toxic chemical pollutants: a critical reviewBackground of the review

Traditionally, statutes and legal practices in environmental pollution have tended to dictate management approaches that focus on risks posed by a single chemical in a specific medium [32,33,34,35]. Inferences about risks were based almost exclusively on observations of toxicity from high doses of chemicals in laboratory animals or the workplace. In reality, the exposure of humans to chemical mixtures is the rule rather than the exception, and therefore, health risk assessments should focus on chemical mixtures and not on single chemicals [25, 36]. It is true, however, that humans have learned to cope with exposure to various chemicals, simultaneously [25]. The toxicological data derived from exposure to different chemicals and environmental media, which is critical in the adverse outcome pathway (AOP) concept, provides a structured basis for clustering substances into risk assessment groups, identifying and collecting relevant toxicity data and identifying possible key upstream events used to calculate relative potency factors [25]. Many studies carried out in the last decade on potentially toxic metal and cyanide pollution made recommendations around legal and regulatory refinement or enforcement, but this has not adequately addressed the problem. While traditional approaches have tremendously contributed to reducing health, safety, and environmental risks in the past, they are inadequate for resolving more complex risks [4, 11, 35]. Therefore, creative and integrated approaches that address multiple environmental matrices and sources of risks are needed to sustain and strengthen environmental improvements, and for risk reduction. A health risk management framework is critical for risk decisions related to setting standards, controlling pollution, protecting health, and cleaning up the environment [4, 9, 11, 34, 35].

Review question

What are the global chemical risk management frameworks in use, their strengths, and shortcomings?

Inclusion/exclusion criteria

Peer-reviewed articles and grey literature would be identified, screened, assessed for eligibility, and included in the review using the four-step Prisma flow chart [37, 38]. A critical review of literature from relevant publications, studies and reports written in English from 2002 to 2022 would be done. The scope of the review would focus on potentially toxic chemical elements, associated health risks, and management frameworks. The reviewed literature will exclude studies on the benefits of heavy metals or cyanide.

Review methods

Titles and study abstracts would be reviewed first before extracting full articles and documents [38]. The researchers will review titles and abstracts to identify research articles and documents or reports that would be relevant to this systematic review. Key words in the search strategy include risk management framework; potentially toxic metals; cyanide; human health risks and risk assessment. These would be used to search for literature from databases such as EBSCO, Science Direct, PUBMED, Google Scholar, and Web of Science. To maintain high quality and academic standards, which form the foundation of literature review studies, only peer-reviewed articles published in highly reputable journals (indexed by Medline, Scopus, and Scimago) would be reviewed. Also, risk management framework documents (grey literature) developed by governments and private organisations would be reviewed. The AMSTAR tool will be utilised to assess the methodological quality of systematic reviews [39].

Data extraction and synthesis

After the initial title and abstract screening, the selected articles and documents will be retrieved using a standardised protocol to extract the following information: management framework or approach, general description of the framework, potentially toxic chemicals, and references. The risk of bias will be reduced by focusing on the methodological criteria described above.

Phase 1(a): quantitative study

An analytical cross-sectional survey would be used to determine levels of heavy metals in surface water, soil, and vegetables. Free cyanide will be determined in surface water samples only. Considering the huge and diverse number of toxic substances and their possible combinations, it is very important to identify and prioritise substances, and mixtures of concern to effectively manage them [27, 32]. Potentially toxic chemical pollutants associated with industrial activities in the area would be determined. Most of the industrial activities in Kwekwe revolve around base metal and gold mining, ferro-chrome smelting, and processing. This quantitative study would involve health risk assessment associated with identified heavy metals and cyanide. Environmental sampling will be done as per the British Columbia Sampling Manual within 8 to 12 months. Sampling sites would be selected based on their easy accessibility and representativeness [40]. The soil and vegetable samples would be prepared and analysed following the Method 3050b [41]. Water samples would be prepared and analysed following the EPA method 3005a. Reference samples for soil, surface water, and vegetables would also be collected outside the industrial and mining sites.

Soil sampling, preparation, and analysis

Two hundred grams of triplicate samples would be collected at depths of 0–15 cm from stream beds, roadsides, footpaths, school grounds, parks, and rooftops using a garden trowel. The triplicate samples will be homogenously mixed, quartered, and placed in sealable polythene bags. The samples will be placed in a cooler box with dry ice during field trips en route to the laboratory, where they will be frozen at 4 °C until required for analysis [40]. Soil sample preparation would involve defrosting, air-drying at 30 °C, and thorough mixing. 0.1 g of each sample will be measured and mixed with 3 mL of nitric acid (HNO3) in a 10-mL borosilicate vial. The mixture is left at room temperature to allow a pre-digestion of the contents. The glass vial is then capped and placed in hot block at 120 °C. After 1 h, 1 mL of 30% hydrogen peroxide (H2O2) is carefully added and heated for one more hour at 120 °C. The digested sample is then diluted 3 times, and each sample is then measured 2 times and 2 blanks are processed as well. The samples would be analysed using flame atomic absorption spectrometry (FAAS) following EPA method 3050B. The rationale for using this method is that it has specificity for the accurate detection and quantification of heavy metals [41].

Surface water sampling, preparation, and analysis for total dissolved metals

Samples would be collected from streams and other water bodies in the industrial areas. One-litre sampling bottles would be washed thoroughly, soaked in 10% HCl for 24 h, rinsed with deionised water, and dried [40]. Before sampling, the bottles will be rinsed quantitatively with water to be sampled. Triplicate surface water samples will be randomly collected at water depths of 30–80 cm within a distance of 20–50 m from each sampling site. The individual samples from a site will be equally and homogenously mixed to form one and then split into two samples, measuring one litre each. At the sampling site, the split water samples would be filtered through a 0.45-µm filter to remove turbid and suspended matter. The one sample for metal analysis would be preserved by adding 0.3 mL 65% HNO3 to attain a pH below 2 to prevent adsorption and crystallisation of metals before analysis and then stored at 4 °C [41]. During the field trip, a field bank made of distilled water will be treated in the same manner as the experimental water samples [40]. The samples would be analysed for total dissolved heavy metals using FAAS [41].

Surface water sampling, preparation, and analysis for free cyanide test

50% (10 M) sodium hydroxide is added to the other split water sample (pH is adjusted to 12) is stored in the dark at 4 °C in a cooler box. The sample will be stored under these conditions for up to 14 days before analysis. Cyanide determination would be determined using the ion-selective electrode [41]. 0.5 ml of sodium hydroxide (ionic strength adjustment solution, ISA) would be added to 50 ml of the water sample in a 100-ml beaker and a PTFE-coated magnetic stirrer would be added to the sample. The beaker would be placed on a magnetic stir plate and stirred at a slow speed. The tip of the electrode is immersed just above the rotating stirrer. The meter is read (in millivolts or concentration) as soon as the reading stabilises within 5 min of immersing the electrode tip. If the reading is in millivolts, CN concentration is determined from the calibration curve.

Vegetable sampling, preparation, and analysis

Four types of vegetables (leafy, tubers, fruit type, and legume-like) commonly grown and consumed in the study area would be hand-picked in triplicates. The samples would be washed with tap water and rinsed using distilled water to remove any attached soil particles, then placed in clean sealable polythene bags and kept on dry ice in the field. The samples would be stored frozen in the laboratory until required for analysis. When ready for analysis, the samples would be allowed to defrost and then ground using a pestle and mortar into a fine powder. The triplicate vegetable samples would be weighed (0.1 g) into glass vials and 3 ml concentrated HNO3 will be added. The preparation and analyses would proceed as in the EPA method 3050b used for the soil samples. The results would be reported in mg/kg dry weight of the sample.

US EPA health risk assessment procedure

To estimate the potential health risks associated with long-term ingestion of food contaminated with toxic elements, the average daily dose (ADD) of contaminant, hazard index (HI), target hazard quotient (THQ), and non-carcinogenic risk (NCR), and carcinogenic risk (CR) will be calculated [9]. \(} = \frac} \times } \times } \times }} \right)}}} \times }}}\), where Ci is contaminant concentration, IR is ingestion rate, EF is exposure frequency, ED is exposure duration, BW is consumer body weight, and AT is the average time. The health risk is assessed with its non-carcinogenic and carcinogenic effects based on the calculation of ADD estimates and defined toxicity [9, 12, 24]. The estimation of the non-carcinogenic risk of contaminant consumption is determined using THQ values. The target hazard quotient is a ratio of the determined dose of a contaminant to the oral reference dose considered detrimental. An exposed population is at risk if the ratio is greater than or equal to 1. The non-carcinogenic risk is calculated as follows: \(} = \frac}}}}}}\) where RfD is the reference dose. The HI estimates the potential human health risk when more than one toxicant is involved and is calculated as the sum of THQs. Carcinogenic risk assessment is the incremental probability of an individual developing cancer over a lifetime due to exposure to a potential carcinogen [12, 23, 24, 28]. The equation for calculating the lifetime carcinogenic risk is: \(} = \mathop \sum \limits_^ \left( } \times }} \right)\).

Risk is a probability (without units) of a person developing cancer over a lifetime [12]. ADDk (mg/kg/day) and CSFk (mg/kg/day) are average daily doses and the cancer slope factor, kth toxic element, for number (n) of elements. The slope factor converts the estimated daily dose of the toxic element averaged over a lifetime of exposure directly to the incremental risk of an individual developing cancer [9]. The total excess lifetime cancer risk for an individual is finally calculated from the average contribution of the individual elements for all the pathways using the following equation: \(}\left( }} \right) = }\left( }} \right) + }\left( }} \right) + }\left( }} \right)\), where Risk (inh), Risk (ing), and Risk (dermal) are risk contributions through ingestion, inhalation, and dermal pathways, respectively [12, 23].

Reliability and validity

Certified analytical-grade reagents would be procured from reputable suppliers. For quantification and detection limits of the FAAS, a blank solution will be read several times, and standard deviations will be considered for the noise generation level for each analyte [41]. To check for the reproducibility and accuracy of the analysis, each sample will be measured in triplicate. Certified reference materials (CRMs) and standard reference solutions with known concentrations of elements [23, 41] will be used to assure quality and establish the accuracy of the measurements using the FAAS and ion-selective electrode method.

Data collection and analysis data

The data on environmental sample analysis obtained from the FAAS would be printed on tabulated spreadsheets from an interfaced computer and stored until required for analysis. The analysis of quantitative data would be done using descriptive and inferential statistical methods in R [12, 23]. The one-way ANOVA, principal component analysis (PCA), Pearson correlation, and Akaike information criteria (AIC) will also be performed on data. One–way ANOVA would be used for statistical analysis since there would be one independent variable and one dependent variable. The PCA would be used to establish the main variables associated with specific environmental compartments and the contribution of variables to data variance. The Pearson correlation analysis would measure the linear correlation between environmental pollutants. The AIC would elaborate on the variables which are important for predicting the relationship between levels of environmental pollutant, and the reported community health problems [38].

Phase 1(c): qualitative study

The phenomenological qualitative inquiry will be used to investigate events or phenomena around health risks associated with environmental pollutants to describe or interpret participants' lived experiences [29]. The study aims to understand the participants' health problems, health status, behaviours, and attitudes regarding health risks associated with heavy metals and cyanide pollution [29, 42]. The qualitative study will augment the quantitative study by gathering complementary data from the study population, which is critical in data triangulation. This research design would also help to identify local health problems and potential solutions that could facilitate the development of a framework to prevent and control specific health problems to improve health outcomes. The qualitative research process is outlined as shown in Table 2

Table 2 Research process outline for the qualitative study design

The city has 22 health facilities and at least 2 health workers (doctors, nurses, and environmental health practitioners) from each facility would be selected, however, the sample size would depend on data saturation.

Study population

The health service providers, community leaders, environmental regulatory officers, and local authority managers would be recruited as key informants. The residents living in or near mining and industrial sites would also be recruited for the study. The participants of mixed gender and in equal proportion will be purposively selected. The health providers would include nurses, environmental health practitioners, and medical doctors working or resident in study areas. Community leaders would include councillors, and headmasters or teachers.

Sampling

Kwekwe city was purposively chosen as the study site due to mining and heavy industrial activities, which are prevalent in the area. Purposive sampling will be used to select key informants and residents to participate in the study. The sample size for key informants to be interviewed would be determined by data saturation, while 5–8 residents from 5 study sites would be selected for focus group discussions. The sampling process for the target population is summarised in Table 2.

Sample size and sampling

The participants would be selected using the purposive sampling method [38]. Key informants in study areas will be visited at their workplaces during normal working hours, and permission to interview them will be sought from heads of their institutions or gatekeepers. The health workers from each of the twenty-two health facilities in the study area would be purposively selected. Health workers are often involved in information dissemination and public health programmes, thus more knowledgeable about health events in their communities [29]. The teachers and lecturers drawn from 7 schools and colleges in the study area will also be recruited at their workplaces and homes. The local authority councillors and officials, and EMA officers are familiar with local environmental and health problems in their areas; hence, they would also be recruited. The residents would be recruited from their homes and or workplaces in wards 2, 5, 6, 7, 10, and 13, which are areas where mining and industrial activities are prevalent. However, the sample size for each group will be determined by data saturation. Five focus groups of 5–8 participants from mining and industrial areas, comprising an equal number of males and females would be chosen. All ethical protocols will be adhered to in the selection of research participants.

Inclusion/exclusion criteria

Health providers, EMA and council officials, teachers and residents from different parts of the study area would be eligible to participate in the study. The justification for their inclusion in the study is premised on their knowledge of environmental health issues and lived experiences. Participants aged between 18 and 65 who would have stayed in the study area for at least 6 months would participate in the study since they are perceived to have a better understanding and recall of past environmental or health events. Residents who are bed ridden and the mentally sick will be excluded from the study since they may have recall problems or may not fully comprehend the aspects of the study, especially health risks associated with heavy metals and cyanide.

Measurement instrument

The focus group discussion guides, unstructured interview guides and checklists would be used by the researcher for data collection over a period of 6–8 months. The unstructured interview and focus group discussion guides will be used to obtain data from key informants and residents. Each focus group discussion will be conducted for an average period of 45 min, and interviews will be conducted for an average of 15 min per person. The residents would participate in FGDs, and each of the 5 groups would comprise 5–8 participants. The unstructured interview guides and checklists would be in languages commonly used in the area, which include English, Shona, and Ndebele. Probing questions will be asked to seek clarity on issues that would arise during interviews and focus group discussions [38]. A pretest of the tools will be conducted in Globe and Phoenix Mine (in Ward 6) to avoid contamination of sampling pools. Three residents from the community, three from health facilities, and two from EMA would be selected to participate in unstructured interviews and one focus group discussion. The responses from the pretest would be transcribed and analysed. Appropriate adjustments would be made to the FGD and interview guides, but the results of the pretest would not be reported.

Data collection and analysis

Unstructured interviews would be administered on key informants to understand public and environmental health problems associated with heavy metals, and cyanide. The interviews and focus group discussions would focus on the nature of health problems associated with toxic metal and cyanide pollution that is encountered by the community, nutritional issues, modes of exposure to heavy metals and their sources, and possible solutions to the problems. Note-taking, tape recording, and photographs would be taken during FGDs and interviews after obtaining permission from participants. For data analysis, the following steps would be taken: familiarising with the data, generating initial codes, searching for themes, reviewing themes, defining themes, and writing up [29]. Themes are patterns across data sets that are important in describing a phenomenon and are associated with a specific research question. The data (that would have been obtained in Shona or Ndebele) collected from respondents would be transcribed, translated to English, and clustered into main themes, categories, and sub-categories using N-Vivo 12 statistical software. The themes would be presented as findings that would be interfaced with results from the quantitative study.

Trustworthiness of the study

Trustworthiness is a function of credibility, transferability, dependability, and conformability and is critical in ensuring the data's robustness [29, 38]. The use of different data collection instruments and various categories of respondents through FGDs and interviews would contribute to research credibility [38]. Also, prolonged engagement, peer debriefing, negative analysis, and member checking are key to ensuring research credibility [29]. Transferability refers to the extent to which a study's findings can be generalised to a broad population or applied to different settings. Expert involvement and method/data triangulation are critical in ensuring the transferability of the study. Dependability refers to a process of evaluating the quality of integrated processes of data collection, analysis, and theory generation [29]. The use of a parallel mixed-method convergent study to collect and analyse data would strengthen the reliability of the study. The data collection and analysis strategies will be comprehensively provided to ensure a clear and accurate picture of the methods used in this study. Also, ethical clearance would be sought from relevant bodies and the research findings would be presented to experts and key stakeholders as a way of validation. In order to ensure conformability of findings, manuscripts would be submitted to peer-reviewed journals to enable reviewers to scrutinise the methods and data analysis techniques used to collect, analyse and interpret data [29, 38].

Merging of quantitative and qualitative data

The researcher would merge quantitative and qualitative data by separately comparing, analysing, and interpreting the findings [29]. This would show that the two data sets bring about convergence or divergence [29, 38]. If there is divergence, the researcher would follow up or indicate that as a limitation. Alternatively, the researcher may revisit the data as this might be an indication of errors in data collection.

Phase 2(a): development of a health risk management framework

This phase will involve the development of a framework that would assist in managing health risks associated with potentially toxic chemicals, with a focus heavy metals and cyanide. The results from both qualitative and quantitative studies would be used to develop the framework for managing heavy metals and cyanide health risks in the community. As outlined in Table 3, the development of the health risk management framework would involve applying a SWOT analysis, a logical framework, and a multi-level intervention model [43,4,45].

Table 3 Research process outline for the development and validation of risk management framework

The Strengths, Weaknesses, Opportunities, and Threats (SWOT) analysis is an organised process that aims to identify and analyse the strengths, weaknesses, opportunities, and threats to the framework designed to achieve specific objectives [38]. A deeper understanding of health risks posed by heavy metals and cyanide would be obtained from the merged qualitative and quantitative data. The SWOT technique would be applied to the findings to develop practices, systems, and policies that would be critical in managing pollution-related anthropogenic and environmental factors. The SWOT analysis would assist in identifying and analysing internal and external factors that are key in developing the management framework. This would form the basis of framework concept brainstorming and appraisal using the logical framework (log frame). Findings obtained from the SWOT analysis would then be scrutinised using the log frame, which will be used to guide the development of the health risk management framework based on SWOT analysis findings. The log frame is a set of interlocking concepts utilised dynamically to develop a well-designed, objectively described, and valuable project [43]. The log frame defines four basic levels of responsibility, which include inputs (resources and activit

留言 (0)

沒有登入
gif