Abbas R, Shehata N, Mohamed EA, Salah H, Abdelzaher M (2021) Environmental safe disposal of cement kiln dust for the production of geopolymers. Egypt J Chem 64(12):7429–7437
Abdelzaher MA (2021) Experiential investigation on the effect of heavy fuel oil substitution by high sulfur petcoke on the physico-mechanical features and microstructure of white cement composites. Eng Res Express 3(1):015028
Abdelzaher MA (2022) Performance and hydration characteristic of dark white evolution (DWE) cement composites blended with clay brick powder. Egypt J Chem 65(8):419–427
Abdelzaher MA, Awad MM (2022) Sustainable development goals for the circular economy and the water-food nexus: full implementation of new drip irrigation technologies in upper Egypt. Sustainability 14(21):13883
Abdelzaher MA, Shehata N (2022) Hydration and synergistic features of nanosilica-blended high alkaline white cement pastes composites. Appl Nanosci 12(5):1731–1746
Abdelzaher MA, Hamouda AS, Ismail IM, El-Sheikh MA (2018) Nano titania reinforced limestone cement: physico-mechanical investgation. In: Key engineering materials, vol 786. Trans Tech Publications Ltd, pp 248–257
Adarsh UK, Kartha VB, Santhosh C, Unnikrishnan VK (2022) Spectroscopy: a promising tool for plastic waste management. TrAC Trends Anal Chem 149:116534
Ariffin NF, Hussin MW, Sam ARM, Bhutta MAR, Khalid NHA, Mirza J (2015) Strength properties and molecular composition of epoxy-modified mortars. Constr Build Mater 94:315–322
AJAIWC ASTM PA, USA (2013) C191-13 Standard test methods for time of setting of hydraulic cement by vicat needle
ASTM C109/C109M (2016) Standard test method for compressive strength of hydraulic cement mortars
ASTM C191 (2013) Standard test methods for time of setting of hydraulic cement by vicate needle
Balboul BA, Abdelzaher M, Hamouda AS, Zaki AH (2019) Nano titania combined with micro silica reinforced limestone cement: physico-mechanical investigation. Egypt J Chem 62(6):1105–1115
Barnes SJ (2019) Understanding plastics pollution: the role of economic development and technological research. Environ Pollut 249:812–821
Bellmann F, Damidot D, Möser B, Skibsted J (2010) Improved evidence for the existence of an intermediate phase during hydration of tricalcium silicate. Cem Concr Res 40(6):875–884
Benjeddou O, Alyousef R, Mohammadhosseini H, Soussi C, Khadimallah MA, Alabduljabbar H, Tahir MM (2020) Utilisation of waste marble powder as low-cost cementing materials in the production of mortar. J Build Eng 32:101642
Burwell R, Allmaras R, Amemiya MJ (1963) A field measurement of total porosity and surface microrelief of soils. Soil Sci Soc Am J 27(6):697–700
Costa FN, Ribeiro DV (2020) Reduction in CO2 emissions during production of cement, with partial replacement of traditional raw materials by civil construction waste (CCW). J Clean Prod 276:123302
Du S, Wu J, AlShareedah O, Shi X (2019) Nanotechnology in cement-based materials: a review of durability, modeling, and advanced characterization. Nanomaterials 9(9):1213
El-Kattan IM, Abdelzaher MA, Farghali AA (2020) Positive impact of ultra fine-ceramic waste on the physico-mechanical features and microstructure of white cement pastes composites. J Market Res 9(4):9395–9402
Elkhouly HI, Abdelzaher MA, El-Kattan IM (2022) Experimental and modeling investigation of physicomechanical properties and firing resistivity of cement pastes incorporation of micro-date seed waste. Iran J Sci Technol Transact Civil Eng 46(4):2809–2821
Evode N, Qamar SA, Bilal M, Barceló D, Iqbal HM (2021) Plastic waste and its management strategies for environmental sustainability. Case Studies Chem Environ Eng 4:100142
Ferraro RM, Nanni A (2012) Effect of off-white rice husk ash on strength, porosity, conductivity and corrosion resistance of white concrete. Constr Build Mater 31:220–225
Ghosh SN (Ed.) (2003) Advances in cement technology: chemistry, manufacture and testing.
Goli VSNS, Mohammad A, Singh DN (2020) Application of municipal plastic waste as a manmade neo-construction material: issues & wayforward. Resour Conserv Recycl 161:105008
Gupta A, Khalid N, Hathi P, Srivastav N, Vyas S, Coffey D (2019) Coercion, construction, and ‘ODF paper pe’: Swachh Bharat according to local officials
Hahladakis JN, Iacovidou E, Gerassimidou S (2020) Plastic waste in a circular economy. In: Plastic waste and recycling. Academic Press, pp 481–512
Kim J, Tae S, Kim R (2018) Theoretical study on the production of environment-friendly recycled cement using inorganic construction wastes as secondary materials in South Korea. Sustainability 10(12):4449
Kineber AF, Othman I, Oke AE, Chileshe N, Buniya MK (2020) Identifying and assessing sustainable value management implementation activities in developing countries: the case of Egypt. Sustainability 12(21):9143
Kong D, Huang S, Corr D, Yang Y, Shah SP (2018) Whether do nano-particles act as nucleation sites for CSH gel growth during cement hydration? Cement Concr Compos 87:98–109
Kurda R, de Brito J, Silvestre JDJC (2019) Water absorption and electrical resistivity of concrete with recycled concrete aggregates and fly ash. Cement Concrete Compos 95:169–182
Ludwig HM, Zhang W (2015) Research review of cement clinker chemistry. Cem Concr Res 78:24–37
Marzouk M, Azab S (2014) Environmental and economic impact assessment of construction and demolition waste disposal using system dynamics. Resour Conserv Recycl 82:41–49
Mukherjee AG, Wanjari UR, Chakraborty R, Renu K, Vellingiri B, George A, Gopalakrishnan AV (2021) A review on modern and smart technologies for efficient waste disposal and management. J Environ Manag 297:113347
Myers RJ, Bernal SA, San Nicolas R, Provis JL (2013) Generalized structural description of calcium–sodium aluminosilicate hydrate gels: the cross-linked substituted tobermorite model. Langmuir 29(17):5294–5306
Ncube LK, Ude AU, Ogunmuyiwa EN, Zulkifli R, Beas IN (2021) An overview of plastic waste generation and management in food packaging industries. Recycling 6(1):12
Nik AS, Bahari A (2012) Nano-particles in concrete and cement mixtures. In: Applied mechanics and materials, vol 110. Trans Tech Publications Ltd, pp 3853–3855
NORM, DIN. “5033–2.”(1992)
Osial M, Pregowska A, Wilczewski S, Urbańska W, Giersig M (2022) Waste management for green concrete solutions: a concise critical review. Recycling 7(3):37
Owaid KA, Hamdoon AA, Maty RR, Saleh MY, Abdelzaher MA (2022) Waste polymer and lubricating oil used as asphalt rheological modifiers. Materials 15(11):3744
Saikia N, De Brito J (2012) Use of plastic waste as aggregate in cement mortar and concrete preparation: a review. Constr Build Mater 34:385–401
Saleh H, Al-Kahlidi MURTADA, Abulridha HA, Banoon SR, Abdelzaher MA (2021) Current situation and future prospects for plastic waste in maysan governorate: effects and treatment during the COVID-19 pandemic. Egypt J Chem 64(8):4449–4460
Salih WM, Hamdoon AA, Abeed F, Saleh MY, Abdelzaher MA (2022) Polymer wastes reinforced the rheological properties of bitumen composites pastes. Egypt J Chem. https://doi.org/10.21608/ejchem.2022.144144.6287
Schneider M (2015) Process technology for efficient and sustainable cement production. Cem Concr Res 78:14–23
Scrivener KL, Nonat A (2011) Hydration of cementitious materials, present and future. Cem Concr Res 41(7):651–665
Scrivener KL, Juilland P, Monteiro PJ (2015) Advances in understanding hydration of Portland cement. Cem Concr Res 78:38–56
Scrivener K, Ouzia A, Juilland P, Mohamed AK (2019) Advances in understanding cement hydration mechanisms. Cem Concr Res 124:105823
Shahani S, Gao Z, Qaisrani MA, Ahmed N, Yaqoob H, Khoshnaw F, Sher F (2021) Preparation and characterisation of sustainable wood plastic composites extracted from municipal solid waste. Polymers 13(21):3670
Silvestre J, Silvestre N, De Brito J (2016) Review on concrete nanotechnology. Eur J Environ Civ Eng 20(4):455–485
Singh P, Sharma VP (2016) Integrated plastic waste management: environmental and improved health approaches. Proc Environ Sci 35:692–700
Sobolev K (2016) Modern developments related to nanotechnology and nanoengineering of concrete. Front Struct Civ Eng 10(2):131–141
Standard E (2000) Cement-part 1: composition, specifications and conformity criteria for common cements.
Standard EESTI (2005) Methods of testing cement-part 1: determination of strength. Quality and Standards Authority of Ethiopia, ES, 1176-1.
Tantawy MA, El-Roudi AM, Abdalla EM, Abdelzaher MA (2013) Fire resistance of sewage sludge ash blended cement pastes. J Eng 2013:1
Zalasiewicz J, Waters CN, Williams M, Summerhayes CP (eds) (2019) The Anthropocene as a geological time unit: a guide to the scientific evidence and current debate. Cambridge University Press
留言 (0)