Patient-specific 3D printing to replace components of a rib-to pelvis “Eiffel Tower” vertebral expanding prosthetic titanium rib system in an infant: a case report

Yang M, Li C, Li Y, Zhao Y, Wei X, Zhang G, Fan J, Ni H, Chen Z, Bai Y, Li M (2015) Application of 3D rapid prototyping technology in posterior corrective surgery for Lenke 1 adolescent idiopathic scoliosis patients. Medicine (Baltimore) 94(8):e582

Article  PubMed  Google Scholar 

Pijpker P, Kuijlen J, Kraeima J, Faber C (2018) Three-dimensional planning and use of individualized osteotomy-guiding templates for surgical correction of kyphoscoliosis: a technical case report. World Neurosurg 119:113–117

Article  PubMed  Google Scholar 

Citak M, Kochsiek L, Gehrke T, Haasper C, Suero E, Mau H (2017) Preliminary results of a 3D-printed acetabular component in the management of extensive defects. Hip Int 28(3):266–271

Article  PubMed  Google Scholar 

Zampelis V, Flivik G (2021) Custom-made 3D-printed cup-cage implants for complex acetabular revisions: evaluation of pre-planned versus achieved positioning and 1-year migration data in 10 patients. Acta Orthop 92(1):23–28

Article  PubMed  Google Scholar 

Girolami M, Boriani S, Bandiera S, Barbanti-Bródano G, Ghermandi R, Terzi S, Tedesco G, Evangelisti G, Pipola V, Gasbarrini A (2018) Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors: Preliminary results of a case-series of 13 patients. Eur Spine J 27(12):3073–3083

Article  PubMed  Google Scholar 

Mobbs R, Coughlan M, Thompson R, Sutterlin C, Phan K (2017) The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report. J Neurosurg Spine 26(4):513–518

Article  Google Scholar 

Thayaparan G, Owbridge M, Thompson R, D’Urso P (2019) Designing patient-specific solutions using biomodelling and 3D-printing for revision lumbar spine surgery. Eur Spine J 28(Suppl 2):S18–S24

Article  Google Scholar 

Redaelli D, Abbate V, Storm F, Ronca A, Sorrentino A, De Capitani C, Biffi E, Ambrosio L, Colombo G, Fraschini P (2020) 3D printing orthopedic scoliosis braces: a test comparing FDM with thermoforming. The Int J Adv Manuf Technol 111:1707–1720

Article  Google Scholar 

Tu Q, Chen H, Ding H, Yu G, Miao Q, Shen J, Huang X, Tang Y, Xia H, Xu J (2021) Three-dimensional printing technology for surgical correction of congenital scoliosis caused by hemivertebrae. World Neurosurg. 27:S1878-8750(21)00094-2

Google Scholar 

Senkoylu A, Cetinkaya M, Daldal I, Necefov E, Eren A, Samartzis D (2020) Personalized three-dimensional printing pedicle screw guide innovation for the surgical management of patients with adolescent idiopathic scoliosis. World Neurosurg 144:e513–e522

Article  PubMed  Google Scholar 

Cecchinato R, Berjano P, Zerbi A, Damilano M, Redaelli A, Lamartina C (2019) Pedicle screw insertion with patient-specific 3D-printed guides based on low-dose CT scan is more accurate than free-hand technique in spine deformity patients: a prospective, randomized clinical trial. Eur Spine J 28(7):1712–1723

Article  PubMed  Google Scholar 

Waldhausen J, Redding G, White K, Song K (2016) Complications in using the vertical expandable prosthetic titanium rib (VEPTR) in children. J Pediatr Surg 51(11):1747–1750

Article  PubMed  Google Scholar 

Wang Y, Yang X, Yan B, Zeng T, Qiu Y, Chen S (2016) Clinical application of three-dimensional printing in the personalized treatment of complex spinal disorders. Chin J Traumatol 19(1):31–34

Article  PubMed  PubMed Central  Google Scholar 

Crews J, Mina M, Johnson E, Guillen J, Simmons J, Joshi A (2018) Risk factors for surgical site infections following vertical expandable prosthetic titanium rib (VEPTR) surgery in children. Spine Deform 6(6):791–796

Article  PubMed  Google Scholar 

Garg S, LaGreca J, Hilaire St T, Gao D, Glotzbecker M, Li Y, Smith J, Flynn J (2014) Wound complications of vertical expandable prosthetic titanium rib incisions. Spine (Phila Pa 1976) 39(13):E777–E781

Article  PubMed  Google Scholar 

Murphy RF, Moisan A, Kelly DM, Warner WC Jr, Jones TL, Sawyer JR (2016) Use of vertical expandable prosthetic titanium rib (VEPTR) in the treatment of congenital scoliosis without fused ribs. J Pediatr Orthop 36(4):329–35

Article  PubMed  Google Scholar 

Gill R, Kinsella C Jr, Lin A, Grunwaldt L, Jiang S, Deeney V, Losee J (1976) (2011) Acellular dermal matrix in the treatment and prevention of exposed vertical expandable prosthetic titanium ribs. Spine (Phila Pa 1976) 15;36(8):E563–E567

Article  Google Scholar 

Burnard J, Parr W, Choy W, Walsh W, Mobbs R (2020) 3D-printed spine surgery implants: a systematic review of the efficacy and clinical safety profile of patient-specific and off-the-shelf devices. Eur Spine J 29(6):1248–1260

Article  PubMed  Google Scholar 

Pijpker P, Kuijlen J, Kaptein B, Pondaag W (2021) Three-dimensional-printed drill guides for occiptothoracic fusion in a pediatric patient with occipitocervical instability. Oper Neurosurg (Hagerstown) 21(1):27–33

Article  PubMed  Google Scholar 

Salazar D, Huff T, Cramer J, WongLinke LG, Zuniga J (2020) Use of a three-dimensional printed anatomical model for tumor management in a pediatric patient. SAGE Open Med Case Rep 2020:8

Google Scholar 

Sakai T, Tezuka F, Abe M, Yamashita K, Takata Y, Higashino K, Nagamuchi A, Sairyo K (2017) Pediatric patient with incidental Os odontoideum safely treated with posterior fixation using rod-hook system and preoperative planning using 3d printer: a case report. J Neurol Surg A Cent Eur Neurosurg 78(03):306–309

PubMed  Google Scholar 

留言 (0)

沒有登入
gif