Impact of thermocycling on surface roughness, microhardness and optical properties of three different lithium disilicate ceramics

The Saudi Dental Journal

Available online 11 August 2022

The Saudi Dental JournalAbstractObjectives

This investigation was carried out to examine the influence of thermocycling aging on the surface roughness (Ra, µm), color parameters (L*, a*, b*), lightness change (ΔL*), chroma change (ΔC*ab), color change (ΔE), and microhardness (VH) of three lithium disilicate ceramics.

Materials and methods

Forty-five specimens were prepared from three lithium disilicate materials (n = 15)—e.max CAD (EC), e.max Press (EP), and GC Initial LiSi Press (LP) ceramics—with dimensions of 6.0 × 1.2 × 16.0 ± 0.2 mm following the manufacturers’ instructions. All specimens were exposed to 5000 thermal cycles with bath temperatures ranging between 5 °C and 55 °C. Data of surface roughness, color parameters, and microhardness were obtained using an optical profiler, a spectrophotometer, and a Vickers hardness tester, respectively. One-way ANOVA, a post-hoc Tukey’s test, and a paired sample t-test were implemented for statistical analysis (p ≤ 0.05).

Results

For surface roughness, insignificant differences were reported between the materials either before or after thermocycling (p > 0.05) while each material displayed a significant increase after being subjected to thermocycling (p < 0.05). For color parameters, LP showed significantly lower L* and b* after thermocycling while EC presented a significant reduction in a* in comparison with other materials (p < 0.05). EP showed a significant decrease in ΔL*, ΔC*ab and ΔE compared with other materials (p < 0.05). Regarding microhardness, LP showed significantly increase value in comparison with other materials (p < 0.05).

Conclusions

Thermocycling had a major impact on the surface roughness, microhardness and optical characteristics of the tested materials. E.max Press displayed less changes in (ΔL*), (ΔC*ab) and (ΔE), while GC LiSi Press had better behavior in terms of microhardness.

Keywords

Lithium disilicate

Surface roughness

Color change

Microhardness

Ceramics

© 2022 The Authors. Production and hosting by Elsevier B.V. on behalf of King Saud University.

留言 (0)

沒有登入
gif